Cat Water Delivery System (WDS) Caterpillar

Show/hide table

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.

Note: In order to access the areas required to perform this procedure, a portable access system (ladder, stair assembly, man lift, or other portable access system) that is suitable and compliant to local regulations may be necessary.

1. Park the machine on a level surface and stop the engine.
   Show/hide table

   Illustration 1	g02589396

2. Remove dust cover (1). Attach an oil drain hose with a 127-9088 Nozzle As to male (receiver) fitting (2) in order to drain the oil. Remove the oil drain hose after the oil is drained.

3. Fill the tank with oil. Refer to Operation and Maintenance Manual, "Lubricant Viscosities" and Operation and Maintenance Manual, "Capacities (Refill)".

   1. If the filler tube is used, remove filler cap (3) in order to fill with oil. Monitor the oil level in sight gauge (4). Install the filler cap after the oil is at the proper level.

   2. If the high speed oil change is used, remove the dust cover and attach the oil fill hose with a 127-9088 Nozzle As to the male (receiver) fitting. Monitor the oil level in the sight gauge. Remove the oil fill hose and install the dust cover after the oil is at the proper level.