C27 and C32 Industrial and Petroleum Engines Caterpillar


Air Lines

Usage:

C32 B2C


Illustration 1g02579998

Table 1
Specification for 239-0275 Air Lines Gp 
Item  Qty  Part  Specification Description 
3H-6624 Bolt  Use the following procedure to tighten the bolts:
1. Tighten the bolt 1 through bolt 16 in a numerical sequence to 5 ± 3 N·m (44 ± 27 lb in).
2. Tighten the bolt 1 through bolt 8 in a numerical sequence to 47 ± 5 N·m (35 ± 4 lb ft). These bolts are 3/8-16 X 3 inches.
3. Position the air lines with the compressor housing and the adapter of aftercooler, so that the air lines are aligned properly with each other.
4. Tighten the bolt 9 through bolt 16 in a numerical sequence to 47 ± 5 N·m (35 ± 4 lb ft). These bolts are 5/16-18 X 1 inch. 
6V-5782 Bolt 
17  130-5694 O-Ring Seal  Lubricate the bore of the O-ring seals lightly with 5P-3975 Rubber Lubricant. 
18  6V-3917 O-Ring Seal  Lubricate the bore of the O-ring seals lightly with 5P-3975 Rubber Lubricant. 

Caterpillar Information System:

C175-16 Petroleum Engines Vibration Damper
3500 Marine Engines Alternator Mounting
C175-16 Locomotive Engine Gear Group (Front)
349F and 352F Excavators Machine System Specifications Hydraulic Pedal Control (Auxiliary)
C175-16 Marine Propulsion Engines Gear Group (Front)
C32 Marine and Auxiliary Marine Engines Vibration Damper and Pulley
C32 Marine and Auxiliary Marine Engines Vibration Damper and Pulley
C32 Marine and Auxiliary Marine Engines Vibration Damper and Pulley
C27 and C32 Generator Set Engines Connecting Rod and Main Bearing Journals
3512C Petroleum Engines Maintenance Recommendations
3512C Petroleum Engines Engine Air Precleaner - Check/Clean
3512C Petroleum Engines Refill Capacities
3500 Engines for Caterpillar Built Generator Sets Air Starting Motor
C175-16 Locomotive Engine Electric Starting Motor
CG137-08 and CG137-12 Engines Exhaust Bypass - Inspect
Cat Water Delivery System (WDS) Monitoring System
C7 Engines for Combat and Tactical Vehicles Maintenance Interval Schedule - Engines Rated 350 Horsepower and Higher
C7 Engines for Combat and Tactical Vehicles Maintenance Interval Schedule - Engines Rated Up to 350 Horsepower
Cat Water Delivery System (WDS) Hydraulic System Oil - Change
2011/06/06 A New Flywheel Housing Cover Group Is Used on C175-16 Generator Set Engines {1157}
XQ400 Power Module Engine Speed/Timing Sensor - Clean/Inspect
2011/05/31 Two Clips Are Added to the Water Lines Group on C175-16 Generator Set Engines {1380}
Network Management Card with Modbus for the UPSB505 Uninterruptible Power Supply Administration: Notification
CX31 and CX31 HT On-Highway Transmissions Speed Sensor (Transmission)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.