Gear Pump (Brake Cooling)
Show/hide table
| |
| Illustration 1 | g02510718 |
Displacement per revolution ...
Rotation ... Clockwise
Maximum pressure ...
Maximum speed ... 2500 rpm
(1) Torque for eight nuts ...
Show/hide table
| |
| Illustration 2 | g02510722 |
|
Section A-A | |
Note: Each section of the pump has the same specifications.
(2) Assemble the retaining ring opening over the drain hole.
(3) Assemble the shaft seals on either side of the retaining ring with the sealing lip of the shaft seal facing outward.
Show/hide table
| |
| Illustration 3 | g02510736 |
|
Section B-B | |
(4) Pressure plates must be assembled with the chamfers on the outlet side.
Caterpillar Information System:
C15 Petroleum Engines Aftercooler - Assemble
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176} Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
C27 Generator Set Generator Set - Test
C15 Petroleum Engines Air Shutoff - Test
C15 Petroleum Engines Coolant Level - Check
G3500 A3 Engines Throttle Control Linkage
C18 Marine Auxiliary and Marine Generator Set Engines Cylinder Liner Projection - Inspect
C15 Petroleum Engines Component Location
C15 Petroleum Engines Aftercooler - Disassemble
C27 Generator Set Sound Information
C15 Petroleum Engines Crankcase Breather - Remove and Install
C7.1-XQ200 Rental Generator Set Product Description
C15 Petroleum Engines Flame Arrestor - Remove and Install
797F and 797F XQ Off-Highway Trucks Automatic Lubrication Reservoir - Fill
C3.4B Engines for Caterpillar Built Machines Electronic Control System
C27 Petroleum Generator Set Engines Electrical Power Supply - Test
UPSB505 Uninterruptible Power Supply AC Capacitor - Replace
797F and 797F XQ Off-Highway Truck Power Train Solenoid Valve (Torque Converter Lockup Clutch)
UPSB505 Uninterruptible Power Supply DC Capacitor - Replace
UPSB505 Uninterruptible Power Supply Performance - Check
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784} Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
C27 and C32 Generator Set Engines Inlet Manifold Air Pressure Sensor
320D and 323D Excavators Machine System Specifications Relief Valve (Main)
C15 Petroleum Engines Starting the Engine