C15 Petroleum Engines Caterpillar


Air Lines - Remove and Install

Usage:

C15 HAZ

Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g02506636

  1. Loosen band clamp (2) and remove air elbow (1).

  2. Loosen band clamp (3) and remove air elbow (4).

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 2g02506636

  1. Position air elbow (4) and band clamp (3). Tighten band clamp (3) to a torque of 8.5 ± 2.0 N·m (75 ± 18 lb in).

  2. Position air elbow (1) and band clamp (2). Tighten band clamp (2) to a torque of 8.5 ± 2.0 N·m (75 ± 18 lb in).

Caterpillar Information System:

2011/06/16 Prevent Water from Entering the Turbocharger Housing of C175-16 Generator Set Engines During Storage {1052}
Break-In Procedure for the 20R-0194 Cylinder Pack Assemblies Used in C32 Marine Engines{1239} Break-In Procedure for the 20R-0194 Cylinder Pack Assemblies Used in C32 Marine Engines{1239}
C3.4B Industrial Engine Configuration Parameters
C15 Petroleum Engines Air Shutoff - Remove and Install
2011/04/29 New Communication Software with RS485 Protocol Improvement Is Now Available on Certain Cat Products {7606, 7610}
C3.4B Industrial Engine Fault Logging
C3.4B Industrial Engine Overspeed
793F and 793F CMD Off-Highway Truck Braking System Control Lever (Retarder)
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084} Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
2011/04/08 New Oil Pump Shaft for C1.5 and C2.2 Engines {1204, 1212, 1234, 1304, 1361}
C3.4B Engines For Caterpillar Built Machines Engine Oil Pump
C3.4B Engines For Caterpillar Built Machines Speed/Timing Sensor
C27 Generator Set Engine Air Cleaner Service Indicator - Inspect
C7.1-XQ200 Rental Generator Set Product Description
C15 Petroleum Engines Crankcase Breather - Remove and Install
C27 Generator Set Sound Information
C15 Petroleum Engines Aftercooler - Disassemble
C15 Petroleum Engines Component Location
C18 Marine Auxiliary and Marine Generator Set Engines Cylinder Liner Projection - Inspect
G3500 A3 Engines Throttle Control Linkage
C15 Petroleum Engines Coolant Level - Check
C15 Petroleum Engines Air Shutoff - Test
C27 Generator Set Generator Set - Test
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176} Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.