Engine Oil Lines
Show/hide table
| |
| Illustration 1 | g02849496 |
|
Right side view | |
Show/hide table
| Specification for 352-8933 Engine Oil Lines Gp | |||
| Item | Qty | Part | Specification Description |
| 3 | 1 | 253-4777 Tube As | Use the following tightening sequence for the clamp bolts:
1. Snugly tighten the clamp assembly (2) to the tube assembly (3). 2. Tighten two bolts (1) of the clamp assembly to the tube assembly (3) to 3. Tighten two bolts (4) of the clamp assembly to the tube assembly (3) to |
| 5 | 6 | 109-2332 O-Ring Seal | Lubricate the bore lightly with the fluid that is being sealed. |
Show/hide table
| |
| Illustration 2 | g02849516 |
|
Top view | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 6 | 1 | 2W-1053 Plug | Torque to |
Caterpillar Information System:
C7 Marine Engine Injector Bolt Torque - Inspect
Troubleshooting the Hydraulic Electronic Unit Injection (HEUI) Fuel System On C7 and C9 Engines{1250} Troubleshooting the Hydraulic Electronic Unit Injection (HEUI) Fuel System On C7 and C9 Engines{1250}
A New Aftercooler Is Used on Certain C9 Marine Engines {1063} A New Aftercooler Is Used on Certain C9 Marine Engines {1063}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093} Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
336F MHPU Mobile Hydraulic Power Unit Machine System Specifications Air Cleaner - Mounting
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150} Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
349F and 352F Excavators Machine System Specifications Swing Gear and Bearing
C7 Marine Engine Engine Speed/Timing Sensor - Clean/Inspect
C7 Marine Engine Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Fluid Recommendations
C7 Marine Engine Refill Capacities
C15 and C18 Petroleum Generator Sets Coolant Extender (ELC) - Add
Replacing the Fuel Injection Pump on Certain C9.3 Engines {1251, 1290} Replacing the Fuel Injection Pump on Certain C9.3 Engines {1251, 1290}
3516C Locomotive Engines Flywheel Housing - Remove
CX31 On-Highway Transmission Retarder - Remove
3516C Locomotive Engines Flywheel Housing - Install
CX31 On-Highway Transmission Retarder - Install
Training Materials {0314, 0374, 4150} Training Materials {0314, 0374, 4150}
349F and 352F Excavators Machine System Specifications Check Valve
349F and 352F Excavators Machine System Specifications Relief Valve (Main)
349F and 352F Excavators Machine System Specifications Accumulator (Pilot)
3500 Engines Engine Oil Sequence Valves - Remove and Install
2011/01/10 A New Waste Gate for the Turbocharger Is Now Being Used on the Certain C13 Industrial Engines {1052, 1053, 1057, 1940}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300} Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}