C1.5 and C2.2 Industrial Engines Caterpillar


California Emission Control Warranty Statement

Usage:

C1.5 G9N

Emissions Warranty

The C1.5 and the C2.2 are an nonroad compression ignition engine.

The California Air Resources Board (CARB) and Caterpillar Inc. are pleased to explain the emission control system warranty on you're C1.5 and the C2.2 diesel engines.

In California, new motor vehicle engines must be designed, built, and equipped in order to meet the state's stringent anti-smog standards. Caterpillar Inc. must warrant the emission control system on your engine for the duration of time listed below provided there has not been any abuse, neglect, or improper maintenance of your engine or your engine aftertreatment system.

Caterpillar Inc. warrants to the initial owner and to the subsequent owner of the C6.6 diesel engine that such an engine is:

  1. Designed, built, and equipped so that the engine conforms, at the time of sale, with all applicable regulations adopted by the California Air Resources Board (CARB).

  2. Free from defects in materials and workmanship in specific emission-related parts for the following period:

    • The warranty period is for 3000 hours or for 5 years, whichever occurs first. After the date of delivery to the owner that operates the engine.

    If an emission-related part fails during any of the warranty periods, the part will be repaired or replaced. Any such part repaired or replaced under warranty is warranted for the remainder of the warranty period.

    During the term of this warranty, Caterpillar Inc. will provide through a Caterpillar dealer or other establishment authorized by Caterpillar Inc., repair or replacement of any warranted part at no charge to the engine owner.

    In an emergency, repairs may be performed at any service establishment, or by the owner, using any replacement part. Caterpillar Inc. recommend that emission-related parts be replaced with genuine Caterpillar Inc. parts.

    Caterpillar Inc. will reimburse the owner. This reimbursement will include diagnostic charges for such an emergency repair. These expenses shall not exceed the Caterpillar Inc. suggested retail price for all warranted parts replaced, and labor charges based on Caterpillar Inc. recommended time allowance for the warranty repair and the geographically appropriate hourly labor rate.

    As a condition of reimbursement, replaced parts and receipted invoices must be presented at a place of business of a Caterpillar dealer. Or other establishment authorized by Caterpillar Inc.

    This warranty covers the following emission-related parts and components:

    • Turbocharger System

    • Inlet Manifold

    • Fuel Injection System

    • Crankcase Ventilation System

    • Electronic Engine Control System

    • Engine Aftertreatment System

    • NOx Reduction System

    • Aftertreatment Regeneration Device

    • Miscellaneous valves, switches, hoses, clamps, connectors, tubing, and sealing devices that are used in the above systems

Limitations and Responsibilities

The warranty is subject to the following conditions:

Caterpillar Inc. Responsibilities

During the emission warranty period, if a defect in material or workmanship of an emission-related part or component is found, Caterpillar Inc. will provide the following:

  • New, Remanufactured or repaired parts and/or components, approved pursuant to (CARB) Regulations, required to correct the defect.

  • Reasonable and customary labor, during normal working hours that is required to make the warranty repair. This includes labor in order to remove an engine and install the engine, if necessary.

Note: Items that are replaced under this warranty become the property of Caterpillar Inc.

Owner Responsibilities

During the emission warranty period, the owner is responsible for the following items:

  • The costs in order to investigate complaints which are not caused by a defect in Caterpillar Inc. material or Caterpillar Inc. workmanship.

  • Providing timely notice of a warrantable failure and promptly making the product available for repair

Limitations

Caterpillar Inc. is not responsible for resultant damages to an emission-related part or component resulting from the following items:

  • Any application or any installation that Caterpillar Inc. deems improper.

  • Attachments, accessory items, or parts not sold nor approved by Caterpillar Inc.

  • Improper engine maintenance, repair, or abuse.

  • Use of improper fuel, lubricants, or fluids.

  • Owners unreasonable delay in making the product available after being notified of a potential product problem.

This warranty is in addition to Caterpillar Inc. standard warranty, applicable to the engine product involved.

Remedies under this warranty are limited to the provision of material and services as specified herein. Caterpillar Inc. is not responsible for incidental or consequential damages, including but not limited to downtime or loss-of-use of engine.

Caterpillar Information System:

C1.5 and C2.2 Industrial Engines Federal Emission Control Warranty
C1.5 and C2.2 Industrial Engines Reference Material
3516C Generator Sets Fuel System Primary Filter (Water Separator) Element - Replace
EMCP4.1/EMCP4.2 Custom Text String Is Not Shown
EMCP4.1/EMCP4.2 Custom Event Is Not Present
3516C Generator Sets Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
CX31 On-Highway Transmission Transmission Planetary - Assemble - Retarder
CX31 On-Highway Transmission Transmission Planetary - Disassemble - Retarder
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Control (Thumb Wheel) - Calibrate
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Variable Relief Valves
EMCP4.1/EMCP4.2 Service Tools
EMCP4.1/EMCP4.2 General Information
C4.4 Industrial Engine Fuel Filter Base - Primary Fuel Filter Base
C6.6 Industrial Engine Flywheel Housing - Flywheel Housing that is Equipped with Rear Power Take-Off
C3.4B Engines Alternator Problem - Charging Problem and/or Noisy Operation
C3.4B Engines Battery Problem
C3.4B Engines Coolant Contains Oil
2010/10/20 A New Camshaft Thrust Washer and Plate Are Used in C175-16 Generator Set Engines {1210, 1210, 7553}
C3.4B Engines Coolant Temperature Is High
C3.4B Engines Cylinder Is Noisy
C175-16 Locomotive Engine Engine Oil Pressure - Test
C27 and C32 Industrial Engines Rear Power Take-Off (RPTO) - Install
320 VH and VM Variable Gauge Undercarriage Track Carrier Roller - Remove and Install - VM Undercarriage
G3500 A3 Engines Coolant Pressure Is High
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.