Fuel Injection Pump Gear - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | - | 拉拔器（双腿式） | 1 |
开始:
- 拆下燃油喷油泵。 有关正确的步骤，请参考拆解和组装, "燃油喷油泵 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
- 使用适当的工具，防止喷油泵齿轮 (3) 旋转。
注: 不要使用正时销喷油，以防喷油泵齿轮旋转。
Show/hide table
 | |
| 图 1 | g02483636 |
- 卸下螺母 (1) 和垫圈 (2) 。
- 使用工具 (A) 将齿轮 (3) 从喷油泵 (7) 的轴上拆下。
- 将键 (6) 从喷油泵 (7) 的轴上拆下。
- 卸下螺栓 (9) 和垫圈 (8) 。 将适配器板 (4) 从喷油泵 (7) 上拆下。
- 拆下 O 形密封圈 (5) 。
Caterpillar Information System:
C4.4 Industrial Engine Fuel Injection Pump Gear - Install
C4.4 Industrial Engine Fuel Injection Pump - Remove
C4.4 Industrial Engine Fuel Injection Pump - Install
C4.4 Industrial Engine Fuel Injection Lines - Remove
C4.4 Industrial Engine Fuel Injection Lines - Install
C4.4 Industrial Engine Fuel Filter Base - Remove and Install - Single Secondary Fuel Filter
C4.4 Industrial Engine Front Cover - Remove and Install
C4.4 Industrial Engine Front Cover - Remove and Install - Heavy Duty Front Cover
C4.4 Industrial Engine Flywheel Housing - Remove and Install - Wet Back End Housing
C9.3 Tier 4 Final Engines Injector Bypass Fuel Flow - Test
C7.1 (Mech) Industrial Engine Cylinder Block
C7.1 (Mech) Industrial Engine Fuel Transfer Pump
C4.4 Industrial Engine Fuel Manifold (Rail) - Remove and Install
C4.4 Industrial Engine Fuel Priming Pump - Remove and Install - Electric Fuel Lift Pump (EFLP)
C7.1 (Mech) Industrial Engine Piston and Rings
C7.1 Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Switches
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408} Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Sensors
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System Solenoid Valves
C4.4 Industrial Engine Gear Group (Front) - Remove and Install - Heavy Duty Gear Group (Front)
C4.4 Industrial Engine Gear Group (Front) - Remove and Install
C4.4 Industrial Engine Glow Plugs - Remove and Install
C4.4 Industrial Engine Housing (Front) - Install - Heavy Duty Housing (Front)