Solenoid Valve (Exhaust Balance) - Remove and Install
Removal Procedure
- Disconnect harness assembly (3) .
Show/hide table
 | |
| Illustration 1 | g02261013 |
View from above. | |
Show/hide table
 | |
| Illustration 2 | g02257338 |
- Disconnect tube assembly (1) .
- Disconnect tube assembly (2) .
- Remove bolt (4) and remove balance valve (5) .
Installation Procedure
- Install the balance valve (5) in the reverse order of removal.
Caterpillar Information System:
3500 Engines Atmospheric Pressure Sensor - Remove and Install
3500 Engines Aftercooler Coolant Temperature Sensor - Remove and Install
3500 Engines Coolant Temperature Sensor - Remove and Install
3500 Engines Turbocharger Outlet Pressure Sensor - Remove and Install
3500 Engines Turbocharger Inlet Pressure Sensor - Remove and Install
3500 Engines Engine Oil Pressure Sensor - Remove and Install
2010/12/13 An Improved Plate Gasket Is Used Between the Spacer Plate and the Cylinder Block on Certain C27 and C32 Engines {1201, 7555}
3500 Engines Air Shutoff - Remove and Install
Servicing Procedure for the Auxiliary Water Pump Seal on Certain C-12 and C12 Marine Engines{1371} Servicing Procedure for the Auxiliary Water Pump Seal on Certain C-12 and C12 Marine Engines{1371}
2010/10/18 Contamination Control Guidelines for Marine Engine Rebuilds, Repair, and/or Overhauls {1000}
C27 and C32 Engines for Caterpillar Built Machines Crankcase Pressure Sensor - Remove and Install
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Condenser
2010/10/08 Discontinued, Genuine Cat Parts Now Available From Vintage Parts , Inc. At Your Cat Dealers {1000, 7000}
3500 Engines Fuel Pressure Sensor - Remove and Install
3512C HD Locomotive Engine Model View Illustrations
2010/09/17 A New Torque Is Used for the Check Valve Group on Certain Marine Engines {1261, 1262, 1274, 5067}
C27 and C32 Industrial Engines Fuel Filter Base - Remove and Install
C7.1 (Mech) Industrial Engine Basic Engine
C7.1 (Mech) Industrial Engine Air Inlet and Exhaust System
C15 and C18 Tier 4 Final Engines Cleanliness of Fuel System Components
C7.1 (Mech) Industrial Engine General Information
C7.1 (Mech) Industrial Engine Turbocharger - Inspect
C7.1 (Mech) Industrial Engine Compression - Test
C7.1 (Mech) Industrial Engine Engine Valve Lash - Inspect/Adjust