Sprocket - Remove and Install
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 138-7576 | 连杆支架 | 1 |
- 将机器定位在第一个支重轮下适当的支座上。 请确保主销位于链轮中心线的上方。
- 分离履带。
Show/hide table
图 2 g02158433 Show/hide table
图 3 g02158434 - 拆下将链轮 (2) 固定至终传动的螺栓 (1)。 重新定位链轮 (2)，然后将工具 (A) 和适当的起吊设备连接到链轮 (2) 上。 链轮 (2) 的重量约为
57 kg (125 lb) 。 拆下链轮 (2)。
Show/hide table
| |
| 图 1 | g02158432 |
- 按与拆卸相反的顺序安装链轮 (2)。
Caterpillar Information System:
325 VM and VH Variable Gauge Undercarriage Track Roller - Remove and Install
2010/05/13 New Flash File for Certain C6.6 Engines {1901, 1920}
C7.1 Industrial Engine Product Lifting - Clean Emission Module
C6.6 Industrial Engine Product Lifting - Engine
Reuse Guideline for the Flexible Exhaust Pipe Group on Tier 4 Engines {1061} Reuse Guideline for the Flexible Exhaust Pipe Group on Tier 4 Engines {1061}
C15 and C18 Tier 4 Final Engines ARD Fuel System - Test
C6.6 Industrial Engine Vibration Damper - Check
C9.3 Engines for Caterpillar Built Machines Electrical Connectors
C6.6 Industrial Engine Vibration Damper and Pulley
C11 and C13 Engines Fuel Injector
2010/07/30 New Cage Assembly Is Used on TH48-E80 Petroleum Transmissions {3160}
2010/05/19 An Improved Water Line Is Now Used on Certain Commercial Engines {1355, 1380, 1393}
Reuse and Salvage for Flywheel Assemblies {1156} Reuse and Salvage for Flywheel Assemblies {1156}
C7.1 Industrial Engine Air Control Valve - Remove and Install - Clean Emissions Module
C7.1 Industrial Engine Alternator - Install
C7.1 Industrial Engine Alternator - Remove
C7.1 Industrial Engine Alternator Belt - Remove and Install
C7.1 Industrial Engine ARD Spark Plug - Remove and Install
C7.1 Industrial Engine Atmospheric Pressure Sensor - Remove and Install
C7.1 Industrial Engine Belt Tensioner - Remove and Install
C7.1 Industrial Engine Boost Pressure Sensor - Remove and Install
C7.1 Industrial Engine Camshaft - Remove and Install
C7.1 Industrial Engine Camshaft Bearings - Remove and Install
C7.1 Industrial Engine Camshaft Gear - Remove and Install