Fastener Group (Vibration Damper)
Show/hide table
图 1 | g02146513 |
(1) 曲轴皮带轮 (2) 减振器 |
按照以下步骤拧紧螺栓 (3)
- 用手拧紧所有螺栓
- 将螺栓 1 至螺栓 8 按图 1 中所示的数字顺序拧紧至 55 ± 10 N·m (41 ± 7 lb ft)
Caterpillar Information System:
797F Off-Highway Truck Power Train Tire and Rim (Rear) - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Tire and Rim (Front) - Remove and Install
C4.4 (Mech) Marine Generator Set MCS-3 Safety Messages
C7.1 Marine Generator Set Generator Winding Insulation - Test
C4.4 (Mech) Marine Generator Set MCS-3 Declaration of Conformity
2010/04/22 Improvement Made to the Harness in the Right-Hand Side Cab Console for Certain Excavators {1408}
C4.4 (Mech) Marine Generator Set MCS-3 Sensors and Electrical Components - MCS Switches and Alarms
C4.4 (Mech) Marine Generator Set MCS-3 Overspeed
C4.4 (Mech) Marine Generator Set MCS-3 Gauges and Indicators
C4.4 (Mech) Marine Generator Set MCS-3 Model View Illustrations
C4.4 (Mech) Marine Generator Set MCS-3 Plate Locations and Film Locations
C4.4 (Mech) Marine Generator Set MCS-3 Emissions Certification Film
2010/06/10 Procedure To Check Crankshaft Deflection in 3600 and C280 Engines {1202}
2010/04/16 A New Strainer Is Used on the Air Starting Systems of Certain C18 and C32 Engines {1451}
XQ Auto Paralleling Safety Messages
XQ Auto Paralleling Electrical System
XQ Auto Paralleling General Information
XQ Auto Paralleling Component Descriptions
XQ Auto Paralleling Component Location
XQ Auto Paralleling Reference Material
XQ Auto Paralleling Fuel System
XQ Auto Paralleling Single Unit Mode
XQ Auto Paralleling Island Paralleling Mode
XQ Auto Paralleling Utility Paralleling Mode