Plate Locations and Film Locations
Cat 产品通过序列号和配置总成号来识别。 在某些情况下,也使用更改号进行识别。 这些编号显示在序列号标牌和发动机信息标牌上。 编号还显示在产品安装的发电机识别标牌上。
Cat 代理商需要这些编号来确定产品上包括的部件。 Cat 代理商可以准确地获得更换用零件号。
Show/hide table
图 1 | g02162619 |
典型示例 |
发动机信息标牌位于缸体左侧的发动机油尺后。
Show/hide table
图 2 | g01332986 |
Cat 代理商需要这些编号以便确定发动机上包括的部件。 Cat 代理商可以准确地获得更换用零件号。
序列号标牌位于底座机架的左侧。
Cat 代理商需要这些编号以便确定发动机上包括的部件。 Cat 代理商可以准确地获得更换用零件号。
发电机识别标牌位于接线盒左侧。
Cat 代理商需要这些编号以便确定发动机上包括的部件。 Cat 代理商可以准确地获得更换用零件号。
Caterpillar Information System:
C4.4 (Mech) Marine Generator Set MCS-3 Emissions Certification Film
C4.4 (Mech) Marine Generator Set MCS-3 Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C4.4 (Mech) Marine Generator Set MCS-3 Engine Air Cleaner Service Indicator - Inspect
C4.4 (Mech) Marine Generator Set MCS-3 Engine Mounts - Inspect
C4.4 (Mech) Marine Generator Set MCS-3 Engine Oil Level - Check
C4.4 (Mech) Marine Generator Set MCS-3 Engine Oil Sample - Obtain
C4.4 (Mech) Marine Generator Set MCS-3 Engine Protective Devices - Check
C4.4 (Mech) Marine Generator Set MCS-3 Engine Valve Lash - Check
C4.4 (Mech) Marine Generator Set MCS-3 Fuel Tank Water and Sediment - Drain
C4.4 (Mech) Marine Generator Set MCS-3 Heat Exchanger - Inspect/Clean
C4.4 (Mech) Marine Generator Set MCS-3 Hoses and Clamps - Inspect/Replace
C4.4 (Mech) Marine Generator Set MCS-3 Overhaul Considerations
C4.4 (Mech) Marine Generator Set MCS-3 Model View Illustrations
C4.4 (Mech) Marine Generator Set MCS-3 Gauges and Indicators
C4.4 (Mech) Marine Generator Set MCS-3 Overspeed
C4.4 (Mech) Marine Generator Set MCS-3 Sensors and Electrical Components - MCS Switches and Alarms
2010/04/22 Improvement Made to the Harness in the Right-Hand Side Cab Console for Certain Excavators {1408}
C4.4 (Mech) Marine Generator Set MCS-3 Declaration of Conformity
C7.1 Marine Generator Set Generator Winding Insulation - Test
C4.4 (Mech) Marine Generator Set MCS-3 Safety Messages
797F and 797F XQ Off-Highway Trucks Machine Systems Tire and Rim (Front) - Remove and Install
797F Off-Highway Truck Power Train Tire and Rim (Rear) - Remove and Install
C9.3 Marine Engines Fastener Group (Vibration Damper)
2010/06/10 Procedure To Check Crankshaft Deflection in 3600 and C280 Engines {1202}