Pump Drive - Disassemble - Integral
拆解步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 6V-5230 | 螺栓 | 2 |
| B | 8B-7551 | 轴承拉拔器总成 | 1 |
开始:
- 拆下泵驱动装置。 请参阅拆解和组装, "泵驱动装置 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 拆下螺栓 (1 ) 。 使用工具 (A) 拆下泵适配器 (2) 。 卸下垫片 (3) 。
Show/hide table
 | |
| 图 1 | g01950546 |
- 拆下 O 形密封圈 (4) 。
Show/hide table
 | |
| 图 2 | g01950588 |
- 拆下轴承外圈 (5) 。
Show/hide table
 | |
| 图 3 | g01950590 |
- 拆下泵驱动齿轮 (6) 。
Show/hide table
 | |
| 图 4 | g01950591 |
- 拆下密封圈 (7) 。
Show/hide table
 | |
| 图 5 | g01950613 |
- 利用工具 (B) 拆下轴承内圈 (8) 。 对其余轴承内环重新执行此步骤。
Show/hide table
 | |
| 图 6 | g01950680 |
- 卸下轴承外圈 (9) 。
Show/hide table
 | |
| 图 7 | g01950681 |
- 对其余的泵驱动齿轮重复步骤 1 到步骤 7。
- 拆下盖 (10) 。
Show/hide table
 | |
| 图 8 | g01950683 |
- 拆下 O 型密封圈 (11) 。 拆下螺栓 (12) 和垫圈。 拆下惰轮轴 (13) 。
Show/hide table
 | |
| 图 9 | g01950685 |
- 拆下惰轮组件 (14) 。
Show/hide table
 | |
| 图 10 | g01950686 |
- 拆下轴承内圈 (15) 和轴承外圈 (16) 。 在对面重新执行此步骤。
Show/hide table
 | |
| 图 11 | g01950691 |
- 拆下挡圈 (15) 。
Show/hide table
 | |
| 图 12 | g01950720 |
Caterpillar Information System:
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Pump Drive - Assemble - Integral
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Event Code List
793F Off-Highway Truck Engine Supplement Air Starting Motor - Remove and Install
C12 Marine Engines Maintenance Recommendations
C9.3 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
C13 Industrial Engines Fuel Filter Base - Secondary Fuel Filter
C18 Marine Engines Oil Cooler Core - Check/Clean/Test - If Equipped
C13 Industrial Engines Fuel Filter Base - Secondary Fuel Filter
C9.3 Tier 4 Final Engines Lubrication System
C9.3 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install - Diesel Oxidation Catalyst, Clean Emissions Module
C13, C15, and C18 Tier 4 Interim Engines ARD Does Not Activate
C9.3 Engines for Caterpillar Built Machines Muffler - Remove and Install
G3304B and G3306B Engines Aftercooler
793F and 797F Off-Highway Trucks Braking System Automatic Retarder - Calibrate
793F and 793F CMD Off-Highway Truck Braking System Pressure Sensor (Brake Pump)
793F and 797F Off-Highway Trucks Braking System Glossary of Electrical Terms
793F and 793F CMD Off-Highway Truck Hydraulic System Hoist Control
C4.4 Industrial Engine Engine Starting
793F and 793F CMD Off-Highway Truck Air System General Information
Camshaft Lobe Hits Fuel Transfer Pump.{1210, 1256} Camshaft Lobe Hits Fuel Transfer Pump.{1210, 1256}
793F and 793F CMD Off-Highway Truck Braking System Brake System
C175 Generator Sets Starting Motor - Inspect - If equipped
C9 Marine Engines Maintenance Recommendations
Procedure for Installing the Space Heater and Setting the Thermostat on High Voltage Generators{1404, 1408, 4459, 7274} Procedure for Installing the Space Heater and Setting the Thermostat on High Voltage Generators{1404, 1408, 4459, 7274}