Electronic Control Module
Show/hide table
Illustration 1 | g01861054 |
Typical example (1) Electronic control module (ECM) (3) Fuel line connectors |
(2) Bolt
- Tighten the four bolts for the ECM. Torque for the bolts ...
22 N·m (16 lb ft)
Caterpillar Information System:
C7.1 Industrial Engine Turbocharger - Series Turbochargers
C6.6 Industrial Engine Front Housing and Covers
C13 Engine for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove and Install
C9.3 Tier 4 Interim Engines Oil Contains Fuel
C9.3 Engines for Caterpillar Built Machines Oil Pressure Is Low
C13 Engine for Caterpillar Built Machines Fuel Pressure Regulator - Remove and Install
C6.6 Industrial Engine Boost Pressure Sensor
CX31-P600 Petroleum Transmission Well Servicing Modulating Valve (Transmission Clutch) - Remove and Install
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Modulating Valve (Transmission Clutch) - Remove and Install
C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
C6.6 Industrial Engine Camshaft Bearings
C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C13 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
C6.6 Industrial Engine Crankcase Breather
C6.6 Industrial Engine Valve Mechanism Cover
C13 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Install
C7.1 Engines for Caterpillar Built Machines Glow Plugs
C4.4 Industrial Engine Fuel Injection Nozzles
C13 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C13 Engine for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
C7.1 Engines for Caterpillar Built Machines Crankshaft
C11 and C13 Engines Fuel Pressure Sensor
C12 Marine Engines Fuel Injector - Inspect/Adjust
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Magnetic Switch