Connector Locations
The Electrical System Schematic, Parts Manual and Operation and Maintenance Manual for the vehicle that is being serviced should be used to locate electrical components and connectors.
The following information is a guide to reading the tables on the back of the Electrical System Schematic.
- The "Component Location" table uses white circles to mark the locations in the profile of the vehicle and in the area views. Alphabetical letters in the "Machine Location" column indicate a general area of the vehicle. Refer to the corresponding footnote at the end of the table for a description of the location.
- The "Harness Connector Location" table uses white circles to mark the locations in the general view and in the area views. Alphabetical letters in the "Machine Location" column indicate a general area of the vehicle. Refer to the corresponding footnote at the end of the table for a description of the location.
Harness Connectors
Show/hide table
Illustration 1 | g01255959 |
Electronic Control Unit (ECU) |
Show/hide table
Illustration 2 | g01255962 |
J1 and J2 Harness Connectors that mate to the ECU |
OEM Connector
This connector routes power and switch inputs to the ECU. Crimping and wire specifications for this connector are similar to the 70 terminal connector. The figures below show pin, socket locations, and keys for the 40-pin connector.
Show/hide table
Illustration 3 | g00923108 |
J3 Harness Connector |
Caterpillar Information System:
3412, 3412C, and 3412E Generator Set Engines Sensor Supply - Test
3500 Generator Sets Generator Start-up Checklist
C18 Marine Generator Set Closed Crankcase Ventilation (CCV) Fumes Disposal Filter - Replace
Reuse and Salvage for 3044, 3046, 3064, 3066, 3400, 3500, and C175 Engine Oil Pumps {1304, 1315} Reuse and Salvage for 3044, 3046, 3064, 3066, 3400, 3500, and C175 Engine Oil Pumps {1304, 1315}
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Voltage Regulator Options
C18 Marine Auxiliary Engine Configuration Parameters
3412, 3412C, and 3412E Generator Set Engines Engine Speed - Test
Exhaust Gas Leakage in Certain 3516B Marine Engines{1050} Exhaust Gas Leakage in Certain 3516B Marine Engines{1050}
G3500B Engines Electrical Power Supply - Test
Leaks In The Filter Housing{3004, 3067} Leaks In The Filter Housing{3004, 3067}
C4.4 Generator Set Engines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
G3304 and G3306 Engines Crankshaft
C18 Marine Generator Set Cooling System Coolant (DEAC) - Change
C18 Marine Generator Set Cooling System Coolant (ELC) - Change
C18 Marine Engines Aftercooler Condensate Drain Valve - Inspect/Clean
2008/09/22 The Wiper Motor Has Been Improved {7305}
2008/09/15 A New Exhaust Elbow Is Used {1059}
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Air Filter Element - Clean/Replace
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Battery - Replace
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Flywheel - Clean
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Oil - Change
2008/09/15 A New Crankshaft Is Used {1202}
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Oil Level - Check
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Sight Gauge - Clean