Fuel Injector
Show/hide table
Illustration 1 | g01608674 |
(1) Solenoid assembly |
Show/hide table
Illustration 2 | g01636469 |
Show/hide table
Illustration 3 | g01636470 |
(6) Exhaust side of the cylinder head |
Use the following procedure in order to install the fuel injector group:
- Lubricate seals (5) with clean engine oil. Lubricate the injector bore (8) with clean engine oil.
- Place the injector into the bore. The pin (4) of the injector fits into the groove (7) of the cylinder head.
- Place the fuel injector clamp (3) with the label "C9" in the UP position.
- When the injector hits the bottom of the bore, torque the bolt (2) to standard torque.
Show/hide table
Illustration 4 g01636471 Show/hide tableIllustration 5 g01636472 Intake side of the cylinder head - Lubricate the bore and the nut of the quill assembly with clean engine oil. Also, lubricate the threads in the cylinder head with clean engine oil.
- Insert the quill assembly (9) completely into the cylinder head. Ensure that the ball (10) of the quill assembly is in line with the slot (12) of the cylinder head.
(11) Torque for the nut of the quill assembly ...
Caterpillar Information System:
G3304 and G3306 Engines Exhaust Manifold
C18 Marine Engines Safety Messages
2008/09/22 A Matched Set of Fan Drive Belts Are Available {1357, 1359}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562} Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
3412, 3412C, and 3412E Generator Set Engines Inlet Manifold Pressure - Test
2009/01/05 List of Caterpillar Service Centers for Napier Turbochargers {1052, 1053}
3500 Generator Sets Generator Operation
3500 Generator Sets Manual Stop Procedure
3500 Generator Sets Starting with Jump Start Cables
3500 Generator Sets Product Storage
C4.4 Generator Set Engines Data Link Circuit - Test
G3304 and G3306 Engines Gas Pressure Regulator
2008/09/08 A New Transmission Control Group Is Now Available {3065}
C13, C15, and C18 Tier 4 Final Engines Camshaft
C11 and C13 Engines Engine Oil Filter Base
374F Excavator Seat
G3304 and G3306 Engines Crankshaft
C4.4 Generator Set Engines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
Leaks In The Filter Housing{3004, 3067} Leaks In The Filter Housing{3004, 3067}
G3500B Engines Electrical Power Supply - Test
Exhaust Gas Leakage in Certain 3516B Marine Engines{1050} Exhaust Gas Leakage in Certain 3516B Marine Engines{1050}
3412, 3412C, and 3412E Generator Set Engines Engine Speed - Test
C18 Marine Auxiliary Engine Configuration Parameters
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Voltage Regulator Options