Gas Pressure Regulator
Show/hide table
 | |
| Illustration 1 | g01676699 |
(2) Regulator outlet (4) Regulator inlet | |
Note: Preset the gas pressure regulator in order to maintain the differential pressure .
Differential pressure with a flow rate of 47 L/min (12 US gpm) and with a pressure of 68.9 kPa (10.0 psi) ... 1.4 ± 0.1 kPa (0.20 ± 0.01 psi)
Maximum supply pressure in the inlet ... 276 kPa (40 psi)
Maximum output pressure of the gauge over set point ... 20.7 kPa (27 psi)
(1) 6l-7140 Spring
- Free length ... 188.92 to 193.68 mm (7.438 to 7.625 inch)
- Outside diameter ... 53.72 mm (2.115 inch)
(3) Torque for 12 bolts ... 17.0 ± 5.0 N·m (13 ± 4 lb ft)
Caterpillar Information System:
3412, 3412C, and 3412E Generator Set Engines Fuel Control - Test
2008/09/15 New Pistons Are Now Used {1214}
345D, 349D and 349D2 Excavators Fuses - Replace
3412, 3412C, and 3412E Generator Set Engines Overspeed - Calibrate
3512B Generator Set Engine Component Location
Petroleum Transmissions Selection Guide {3030} Petroleum Transmissions Selection Guide {3030}
3412, 3412C, and 3412E Generator Set Engines Crank Terminate - Calibrate
C6.6 Marine Generator Set Magnetic Pickup
C6.6 Marine Generator Set Control Panel Mounting
3512B Generator Set Engine Electronic Display Module
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Transformer Voltage Setup
The Use of Unsupported Software Could Cause Unexpected Shifting on Certain TH48-E80 Oil/Gas Transmissions{3168, 7620} The Use of Unsupported Software Could Cause Unexpected Shifting on Certain TH48-E80 Oil/Gas Transmissions{3168, 7620}
C4.4 Generator Set Engines Data Link Circuit - Test
3500 Generator Sets Product Storage
3500 Generator Sets Starting with Jump Start Cables
3500 Generator Sets Manual Stop Procedure
3500 Generator Sets Generator Operation
2009/01/05 List of Caterpillar Service Centers for Napier Turbochargers {1052, 1053}
3412, 3412C, and 3412E Generator Set Engines Inlet Manifold Pressure - Test
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562} Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
2008/09/22 A Matched Set of Fan Drive Belts Are Available {1357, 1359}
C18 Marine Engines Safety Messages
G3304 and G3306 Engines Exhaust Manifold
C9.3 Engine for Caterpillar Built Machines Fuel Injector