C13, C15, and C18 Tier 4 Final Engines Caterpillar


Camshaft

Usage:

826K 232


Illustration 1g03331245

Table 1
Specification for 294-3593 Camshaft Gp 
Item  Qty  Part  Specification Description 
107-7694 Thrust Plate  Thickness of a new thrust washer is 4.7 mm (0.19 inch).
Distance between the shoulder of the camshaft and the shoulder of the gear is 4.83 ± 0.05 mm (0.190 ± 0.002 inch)
Diameter of camshaft bearing journal is 65.126 ± 0.013 mm (2.5640 ± 0.0005 inch)


Illustration 2g03331247

Table 2
Item  Qty  Part  Specification Description 
Use the following procedure in order to determine the actual camshaft lobe lift:
1. Measure camshaft lobe height (C).
2. Measure base circle (D).
3. Subtract the base circle (D) from the camshaft lobe height (C). The difference is the actual camshaft lobe lift. 
Specified camshaft lobe lift for:
Inlet lobe is 9.366 mm (0.3687 inch).
Exhaust lobe is 7.354 mm (0.2895 inch)

Caterpillar Information System:

2008/09/08 A New Transmission Control Group Is Now Available {3065}
C9.3 Engine for Caterpillar Built Machines Fuel Injector
G3304 and G3306 Engines Exhaust Manifold
C18 Marine Engines Safety Messages
2008/09/22 A Matched Set of Fan Drive Belts Are Available {1357, 1359}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562} Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
3412, 3412C, and 3412E Generator Set Engines Inlet Manifold Pressure - Test
2009/01/05 List of Caterpillar Service Centers for Napier Turbochargers {1052, 1053}
3500 Generator Sets Generator Operation
3500 Generator Sets Manual Stop Procedure
3500 Generator Sets Starting with Jump Start Cables
3500 Generator Sets Product Storage
C11 and C13 Engines Engine Oil Filter Base
374F Excavator Seat
G3304 and G3306 Engines Crankshaft
C4.4 Generator Set Engines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
Leaks In The Filter Housing{3004, 3067} Leaks In The Filter Housing{3004, 3067}
G3500B Engines Electrical Power Supply - Test
Exhaust Gas Leakage in Certain 3516B Marine Engines{1050} Exhaust Gas Leakage in Certain 3516B Marine Engines{1050}
3412, 3412C, and 3412E Generator Set Engines Engine Speed - Test
C18 Marine Auxiliary Engine Configuration Parameters
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Voltage Regulator Options
Reuse and Salvage for 3044, 3046, 3064, 3066, 3400, 3500, and C175 Engine Oil Pumps {1304, 1315} Reuse and Salvage for 3044, 3046, 3064, 3066, 3400, 3500, and C175 Engine Oil Pumps {1304, 1315}
C18 Marine Generator Set Closed Crankcase Ventilation (CCV) Fumes Disposal Filter - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.