2008/07/07 Caterpillar


New Flash File {1901, 7620}

Usage:

3054E 304
Industrial Engine:
3054E (S/N: 304341-5244)

Rapid deceleration of a hot engine can cause the engine oil pressure to momentarily dip below the threshold value of the warning lamp. Illuminating the warning lamp for the engine oil pressure and recording an incorrect E100 event code "Low Engine Oil Pressure Warning". The threshold value of the warning lamp at all speeds has been changed. This means that the warning light for low oil pressure will not be illuminated and an E100 event code is not generated unless the oil pressure drops below 100 kPa (14.5 psi) for two seconds.

A new flash file has been introduced. Update the flash file for the warning level for the engine oil pressure so that the intermittent problem not longer occurs.

Caterpillar Information System:

3500B and 3500C Marine Engines Crankcase Breather
C32 Marine Engine Safety Messages
G3516 and G3512 Adem 3 with an Oxygen Sensor Upgrade to Air/Fuel Ratio Control and a Nitrogen Oxide Sensor{1408, 191N} G3516 and G3512 Adem 3 with an Oxygen Sensor Upgrade to Air/Fuel Ratio Control and a Nitrogen Oxide Sensor{1408, 191N}
C32 Marine Engine Plate Locations and Film Locations
G3520B Industrial Engines Speed Control - Test
2008/07/01 Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump {1256}
2008/06/30 Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump {1256}
2008/07/14 Support for Fuel Injection Pumps {1251}
2008/11/01 A Single Notched Piston Skirt Is Now Used {1225}
793F and 797F Off-Highway Trucks Power Train Electronic Control System Switch Circuits
3500B Locomotive Engines Exhaust Manifold
3512B Generator Set Engine Fuel Filter
C27 and C32 Industrial and Petroleum Engines Turbocharger
C18 Generator set and C18 Marine Engines Air Lines - Remove and Install
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Pilot Valve (Boom Drift Reduction)
C27 and C32 Industrial and Petroleum Engines Turbocharger
319D Excavator Machine System Specifications Pilot Valve (Travel)
C27 and C32 Industrial and Petroleum Engines Turbocharger
2008/07/14 Updated Electronic Unit Injectors {1290, 1901}
C27 and C32 Generator Set Engines Cylinder Head
3512B Generator Set Engine Flexible Coupling
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System Warm-Up Assist Function
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System General Information
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Configure
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.