Fuel Lines
Show/hide table
| 图 1 | g01503913 |
后侧左视图 | |
(1) 32 只螺栓的扭矩 ... 30 ± 7 N·m (265 ± 60 lb in)
(2) 将 4C-9502 垫片密封胶 涂抹在 2 只软管端头的螺纹上。
(3) 3 个软管卡箍的扭矩 ... 3.0 ± 0.4 N·m (27 ± 4 lb in)
(4) 螺母的扭矩 ... 30 ± 7 N·m (265 ± 60 lb in)
Show/hide table
| 图 2 | g01593757 |
A 区视图 左侧后视图 | |
Show/hide table
| 图 3 | g01503953 |
B 区视图 左侧前视图 | |
Show/hide table
| 图 4 | g01590754 |
C 区视图 右侧前视图 | |
Show/hide table
| 图 5 | g01524783 |
D 区视图 右侧前视图 | |
(5) 压力开关总成的最终安装扭矩 ... 6.78 ± 1.41 N·m (60 ± 12 lb in)
Caterpillar Information System:
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Upper Frame
C9T-TH31 Petroleum Package Product Lifting
C9T-TH31 Petroleum Package Model View Illustrations - C9T-TH31 Petroleum Package
C9T-TH31 Petroleum Package General Hazard Information
345D, 349D and 349D2 Excavator Machine System Specifications Fuel Tank
C9T-TH31 Petroleum Package Safety Messages
2008/03/24 Improved Studs Are Now Used on Certain Oil/Gas Transmission {3030, 3064, 3160}
C13 On-highway Engine Turbocharger
C4.2 and C6.4 Engines for Caterpillar Built Machines Boost Pressure Sensor
349E Excavator Machine System Specifications Bucket Cylinder
C13T-TH35 and C15T-TH35 Petroleum Packages General Hazard Information
793F Off-Highway Truck Lowering the Body with Engine Stopped
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Piston and Rings - Two-Piece Piston
3054B Industrial Engine Balancer - Disassemble
3054B Industrial Engine Balancer - Assemble
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Main Hydraulic Pump
2008/04/07 Improved Studs Are Now Used on Certain Oil/Gas Transmissions {3030, 3064, 3160}
C175-16 and C175-20 Generator Set Engines Engine Misfires, Runs Rough or Is Unstable
793F AC Off-Highway Truck Power Train Bypass Switch (Final Drive Filter)
2008/04/07 Correct Procedures for Installing, Reaming and Coining Copper Sleeves {1100, 1101, 1713}
2008/04/07 Correct Procedures for Installing, Reaming and Coining Copper Sleeves {1100, 1101, 1713}
2008/04/01 Correct Procedures for Installing, Reaming and Coining Copper Sleeves {1100, 1101, 1713}
349F and 352F Excavators Machine System Specifications Pump Head (Main)
3054B Industrial Engine Balancer - Install