2008/01/21 Caterpillar


Inspection of Steel Braided Hoses with Reusable Connectors {7553, 7554}

Usage:

3512 1LM
Caterpillar Products:
  • 3500C Engines
    Engine: Commercial
  • 3500 and 3500B Family All
  • The reusable connector on some steel braided hoses may be incorrectly installed. Refer to Illustration 1. If the gap between the permanent portion of the connector (1) and the swivel portion of the connector (2) is too large, a leak may result. If the fluid in the hose is flammable, a fire may result.




    Illustration 1g01447349

    Typical steel braided hose with reusable fitting

    (1) Permanent portion of the connector

    (2) Swivel portion of the connector

    Inspect the gap between the permanent portion of the connector (1) and the swivel portion of the connector (2). Zero gap is acceptable. The maximum allowable gap is 1.57 mm (0.062 inch). A feeler gauge can be used in order to measure the gap with acceptable accuracy. Replace the hose assembly if the gap exceeds 1.57 mm (0.062 inch).

    Caterpillar Information System:

    2008/04/07 Inspection of Steel Braided Hoses with Reusable Connectors {7553, 7554}
    Specifications and Cleaning Procedures for Cylinder Liners in 3600 and C-280 Engines{0761, 1201, 1213, 1216} Specifications and Cleaning Procedures for Cylinder Liners in 3600 and C-280 Engines{0761, 1201, 1213, 1216}
    C7 Petroleum Engine Configuration Parameters
    C7 Petroleum Engines Fuel Priming Pump
    3512B and 3516B High Displacement Locomotive Engines Maintenance Interval Schedule
    3512B and 3516B High Displacement Locomotive Engines Crankshaft Vibration Damper Fluid Sample - Obtain
    3512B and 3516B High Displacement Locomotive Engines Crankshaft Vibration Damper - Inspect
    C7 On-Highway Engine Relief Valve (Fuel) - Remove and Install
    3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Emergency Stop - Test
    Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Display of Voltage or Current Is Zero
    2008/01/07 Reducing Oil Coking in Turbochargers {1052, 1053, 1077, 1348}
    3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Electrical Power Supply - Test
    3512B and 3516B High Displacement Locomotive Engines Configuration Parameters
    G3520C and G3520E Engines Piston and Rings
    G3516C and G3516E Gas Engines Piston and Rings
    C7 Petroleum Engines Fuel Priming Pump
    3500 Generator Set Engines Engine Oil Filter
    C7 Petroleum Engines Fuel Priming Pump
    C9 Petroleum Engines Jacket Water Heater
    C7 Petroleum Engines Flywheel
    Problem With Spark Plugs In G300 Engines{1550, 1555, 1558} Problem With Spark Plugs In G300 Engines{1550, 1555, 1558}
    Piston Seizures in some G3600 Engines {1225} Piston Seizures in some G3600 Engines {1225}
    C11, C13, and C15 On-highway Engines Engine Crankcase Breather - Clean
    G3600 Engines Coolant Flow Is Low
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.