Gear Pump (Torque Converter and Transmission) - Assemble
组装步骤
Show/hide table
需要的工具     | |||
---|---|---|---|
工具     | 零件号     | 零件名称     | 数量     |
A     | 1P-1857     | 挡圈钳     | 1     |
- 安装双头螺柱 (42) 。
Show/hide table
图 1 | g01186202 |
- 安装轴承 (41) 、板 (40) 、板 (37) 、密封件 (38) 和密封件 (39) 。
Show/hide table
图 2 | g01186201 |
- 将板 (36) 装入壳体 (35) 。
Show/hide table
图 3 | g01186200 |
- 安装齿轮 (34) 、齿轮 (33) 和板 (32) 。
Show/hide table
图 4 | g01186199 |
- 安装板 (28) 、密封件 (29) 、密封件 (30) 和板 (31) 。
Show/hide table
图 5 | g01186198 |
- 安装轴承 (27) 和 O 形密封圈 (26) 。
Show/hide table
图 6 | g01186196 |
- 安装 O 形密封圈 (25) 和壳体 (24) 。
Show/hide table
图 7 | g01186195 |
- 使用工具 (A) 安装挡圈 (23) 。
- 安装 O 形密封圈 (21) 和连接器 (22) 。
- 安装壳体 (20) 。
Show/hide table
图 8 | g01186191 |
- 安装轴承 (19) 。
Show/hide table
图 9 | g01186190 |
- 安装板 (15) 、密封件 (16) 、密封件 (17) 和板 (18) 。
- 安装板 (14) 。
Show/hide table
图 10 | g01186189 |
- 安装齿轮 (13) 、齿轮 (12) 和板 (11) 。
Show/hide table
图 11 | g01186188 |
- 安装板 (7) 、密封件 (8) 、密封件 (9) 和板 (10) 。
Show/hide table
图 12 | g01186186 |
- 安装轴承 (4) 和 O 形密封圈 (3) 。
Show/hide table
图 13 | g01186183 |
- 安装盖 (2) 和螺栓 (1) 。
Show/hide table
图 14 | g01186182 |
End By: 安装齿轮泵。 请参阅 拆解和组装, "齿轮泵(变矩器和变速箱)- 安装"。
Caterpillar Information System:
TH55-E70 and TH55-E90 Petroleum Transmissions Gear Pump (Torque Converter and Transmission) - Disassemble
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Indicator for High Water Temperature
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Indicator for Emergency Stop
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Troubleshooting Dedicated Shutdown Indicators
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) SP Fault Code
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) AL Fault Code
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Sensor Supply - Test
G3600 Engines Cylinder Combustion - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 1170 - FMI 08
C13T-TH35 and C15T-TH35 Petroleum Packages Monitoring System - Additional Information for Caterpillar Model Year 2008 On-highway Engines Regulated by the California Air Resources Board
C7 and C9 On-highway Engines Monitoring System - Additional Information for Caterpillar Model Year 2008 On-highway Engines Regulated by the California Air Resources Board
TH55-E70 and TH55-E90 Petroleum Transmissions Gear Pump (Torque Converter and Transmission) - Install
3500 Engines Exhaust Manifold
3500 Engines Turbocharger
2007/12/10 Installation of Fuel Injection Pump {1251}
2007/12/17 An Improved Start/Stop Control is Now Used on Marine Applications {7418}
C175-16 and C175-20 Generator Set Engines Intake Manifold Air Pressure Is High
G3600 Engines Control Module - Replace - ICSM
G3600 Engines Cylinder Firing Signal - Test
3500 Engines with EUI Option Engine Coolant Temperature Sensor
3500 Industrial Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
345C Excavator Machine System Specifications Boom Lines
345D, 349D and 349D2 Excavator Machine System Specifications Check Valve (Boom Drift Reduction)
3516C Generator Set Engine Diagnostic Trouble Codes