Track Roller (Double Flange)
Show/hide table
Illustration 1 | g06275272 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
1 | - | - | Before assembly, the surfaces must be clean and free from protective coating. |
2 | 2 | 175-7897 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
3 | 2 | 176-5331 Duo-Cone Seal Gp | The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Apply a thin layer of 8C-3698 Oil to the contacting surfaces of the metal seal rings prior to assembly. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist. |
4 | 2 | 123-1382 Track Roller Bearing | Inside diameter after assembly is |
5 | 1 | 9W-2146 Plug | Before assembly, apply blue Loctite 243 to the threads.
Torque to |
- | - | - | End play for track roller shaft:
Minimum is Maximum is |
Caterpillar Information System:
986K Large Wheel Loader Systems Piston Pump (Steering) High Pressure Stall - Test and Adjust
953K Track-Type Loader Power Train Track - Connect
814K Wheel Dozer Capacities (Refill)
C27 and C32 Engine for MD6250 and MD6310 Drill Event Codes
MD6250 Rotary Drill Engine Supplement Fan and Fan Drive Motor - Remove and Install
Enhanced Cab Front Lights Mounting Is Now Used on Certain 953K, 963K, and 973K Track-Type Loaders {7301} Enhanced Cab Front Lights Mounting Is Now Used on Certain 953K, 963K, and 973K Track-Type Loaders {7301}
MD6250 Rotary Drill Engine Supplement Fuel Cooler - Remove and Install
480-1970 Position Sensor Gp (Synchro) Troubleshooting on 966 and 972 XE Medium Wheel Loader, Event Codes E1289, E1290, E1291 {1408, 1439, 3065, 3168, 7324, 7400, 7856} 480-1970 Position Sensor Gp (Synchro) Troubleshooting on 966 and 972 XE Medium Wheel Loader, Event Codes E1289, E1290, E1291 {1408, 1439, 3065, 3168, 7324, 7400, 7856}
MD6310 Rotary Drill Engine Supplement Water Pump - Remove and Install
MD6310 Rotary Blasthole Drill Machine Systems Monitor and Mounting
973 K Track-Type Loaders Piston Pump (Implement)
MD6310 Rotary Blasthole Drill Machine Systems Hydraulic Tank - Mounting - Hammer Oil
814K Wheel Dozer Leaving the Machine
986K Large Wheel Loader Systems Piston Pump (Steering) Margin Pressure - Test and Adjust
D8T Track-Type Tractor Engine Supplement Bottom Guard - Remove and Install
814K Wheel Dozer Monitoring System
D8T Track-Type Tractor Flywheel Lubrication Oil Pressure - Test - Flywheel Housing Lubrication
A New Engine Oil Pump Is Now Used on Certain C175 Commercial Engines {1304} A New Engine Oil Pump Is Now Used on Certain C175 Commercial Engines {1304}
D8T Track-Type Tractor Torque Converter Lockup Clutch Pressure - Test
D8T Track-Type Tractor Power Train Main Drive Shaft - Remove and Install
903D Compact Wheel Loader Quick Coupler - Lubricate
986K Large Wheel Loader Systems Relief Valve (Steering Cylinder Crossover) - Test and Adjust
A New Track Bolt is Available for Certain D6R and D6T Track-Type Tractors Operating in Waste Applications {4170} A New Track Bolt is Available for Certain D6R and D6T Track-Type Tractors Operating in Waste Applications {4170}
903D Compact Wheel Loader Tilt Cylinder Bearings and Bucket Linkage Bearings - Lubricate