Cylinder Head
Show/hide table
| |
| Illustration 1 | g06195220 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | 2 | 480-7205 Valve Seat | During installation, shrunk the valve seat insert with reduced temperature (Reference temperature : |
| 2 | 2 | 456-0411 Valve Seat | During installation, shrunk the valve seat insert with reduced temperature (Reference temperature : |
| 3 | 7 | 3B-0623 Cup Plug | Apply Loctite 540 to the bores for the cup plugs prior to the installation. |
| 4 | 3 | 3B-0645 Cup Plug | Apply Loctite 540 to the bores for the cup plugs prior to the installation. |
| E | - | - | Installation depth for cup plug is |
| F | - | - | Installation depth for cup plug is |
Show/hide table
| |
| Illustration 2 | g06195231 |
Show/hide table
| Bolt Tightening Procedure in the 416-8282 Block Spacer Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 5 | 6 | 448-3955 Cylinder Head Fastener Gp | Use the following procedure to tighten the bolts for the cylinder head as shown in Illustration 2. 1. Before assembly, apply clean engine oil to the bolt threads. 2. Tighten bolt 1 through 8 in the numerical sequence to 3. Again, retighten bolts 1 through 8 in the numerical sequence to 4. Again, retighten bolts 1 through 8 in the numerical sequence to 5. Loosen bolts 1 through 8 in the numerical sequence to an angle of 180 ± 5 degrees. 6. Tighten bolts 1 through 8 in the numerical sequence to 7. Again, retighten bolts 1 through 8 in the numerical sequence to Note: Tighten bolts (7) only after bolts 1 through 8 have been given the final torque. 8. Tighten bolts (7) to |
| 6 | 2 | 448-3958 Cylinder Head Fastener Gp | |
| 7 | 2 | 5B-0213 Bolt | |
Caterpillar Information System:
Next Generation Hydraulic Excavator Air Conditioning and Heating Heater Core (Cab)
Next Generation Hydraulic Excavator Air Conditioning and Heating Fan Control (Blower Motor)
Next Generation Hydraulic Excavator Air Conditioning and Heating Control Module
D6 Track-Type Tractor Power Train System Oil Sample - Obtain
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Lift Cylinder (Decking Blade) - Remove and Install
Next Generation Hydraulic Excavator Air Conditioning and Heating Control Panel (Air Conditioner and Heater)
Next Generation Hydraulic Excavator Air Conditioning and Heating Air Conditioning and Heating System Relay Operation
D6 Track-Type Tractor Power Train System Oil Level - Check
Next Generation Hydraulic Excavator Air Conditioning and Heating Air Conditioning and Heating System Sensor Operation
Next Generation Hydraulic Excavator Air Conditioning and Heating Motor (Air Conditioner Control)
Next Generation Hydraulic Excavator Air Conditioning and Heating Blower Motor
Next Generation Hydraulic Excavator Air Conditioning and Heating Evaporator Coil
D6 Track-Type Tractor Systems Electronic Control (Hydraulic System)
D6 Track-Type Tractor Radiator Pressure Cap - Clean/Replace
D6 Track-Type Tractor Systems Electronic Control (Steering System)
D6 Track-Type Tractor Recoil Spring Compartment Oil Level - Check
D6 Track-Type Tractor Windows - Clean
An Improved Primer Is Now Used for Bonding the Cab Glass on Certain Wheel Loaders {0374, 0649, 7301, 7305, 7310} An Improved Primer Is Now Used for Bonding the Cab Glass on Certain Wheel Loaders {0374, 0649, 7301, 7305, 7310}
An Improved Rotary Switch Assembly Is Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {1408, 7301} An Improved Rotary Switch Assembly Is Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {1408, 7301}
973K Track-Type Loader Machine Systems Cab - Tilt - Partial Tilt
D6 Track-Type Tractor Cooling System Coolant Sample (Level 1) - Obtain
D6 Track-Type Tractor Cooling System Coolant Sample (Level 2) - Obtain
963K Track-Type Loader Machine Systems Bucket Control
Procedure to Install a Wall Flow Diesel Particulate Filter Now Available for AD55B and AD60 Articulated Trucks {108F} Procedure to Install a Wall Flow Diesel Particulate Filter Now Available for AD55B and AD60 Articulated Trucks {108F}