992K Wheel Loader Systems Caterpillar


Service Brakes

Usage:

992K KK2


Illustration 1g06216098

Table 1
Item  Qty  Part  Specification Description 
5H-3701 Purge Screw  Torque to 11 ± 4 N·m (97 ± 35 lb in)
9M-5892 O-Ring Seal  Lubricate the O-ring seal lightly with lubricant that is being sealed. 
115-5658 Seal  Lubricate the seal lightly with lubricant that is being sealed. 
Thickness of five new plates and four new friction discs is 60.90 ± 1.02 mm (2.398 ± 0.040 inch)
5 9U-1739 Outer Plate  Thickness of one new plate is 7.30 ± 0.10 mm (0.287 ± 0.004 inch)
4 493-3796 Friction Disc  Thickness of one new friction disc is 6.10 ± 0.13 mm (0.240 ± 0.005 inch).
Before assembly, dip the discs in lubricant to be used in the final drive. 
8V-3609 Retractor Spring  Length under test force is 86.4 mm (3.40 inch).
Test force is 715 N (161 lb).
Free length after test is 107.7 mm (4.24 inch)
3K-0360 O-Ring Seal  Lubricate the O-ring seal lightly with lubricant that is being sealed. 
9S-4185 Plug  Torque to 70 to 77 N·m (52 to 57 lb ft)
5M-6200 O-Ring Seal  Lubricate the O-ring seal lightly with lubricant that is being sealed. 
9U-1742 O-Ring Seal  Lubricate the O-ring seal lightly with lubricant that is being sealed. 
10  6M-9155 Pin  Diameter is 4.78 ± 0.25 mm (0.188 ± 0.010 inch)
11  133-0992 Thrust Washer  Before assembly, clean contact surfaces of 245-1093 Brake Anchor (14) and 133-0992 Thrust Washer (11) with Solvo Clean 68-0 and dry the surfaces.
Before assembly, apply green Loctite 620 to the either the brake anchor (14) or thrust washer (11) mating surfaces.
Tighten 8C-7562 Flat Head Screw (12) to 28 ± 7 N·m (248 ± 62 lb in) and remove excess compound from the joint. 
13  9S-8005 Plug  Torque to 70 to 77 N·m (52 to 57 lb ft)

Caterpillar Information System:

Final Drive Planetary Gears May Fail on Certain 980M, 980K, and 980L Medium Wheel Loaders {4050, 4051, 4092} Final Drive Planetary Gears May Fail on Certain 980M, 980K, and 980L Medium Wheel Loaders {4050, 4051, 4092}
631K OEM Wheel Tractor Machine Systems General Information (Steering System)
992K Wheel Loader Systems Relief Valve - Line, Tilt Dual Set
992K Wheel Loader Systems Relief Valve - Line, Tilt
992K Wheel Loader Systems Relief Valve - Lift Cylinder Head End
D5R2 Track-Type Tractor Sound Information and Vibration Information
992K Wheel Loader Systems Relief Valve - Lift Cylinder Rod End
An Improved Thermal Bypass Valve Is Now Used on Certain 950-980L and 950–982M Medium Wheel Loaders {1374, 5057} An Improved Thermal Bypass Valve Is Now Used on Certain 950-980L and 950–982M Medium Wheel Loaders {1374, 5057}
Procedure To Relocate Attachment Ready Option (ARO) Connectors On Certain D6N Track Type Tractors {1408} Procedure To Relocate Attachment Ready Option (ARO) Connectors On Certain D6N Track Type Tractors {1408}
992K Wheel Loader Systems Air Cleaner
988K XE Wheel Loader Systems Oil Filter (Hydraulic) - Accumulator
992K Wheel Loader Systems Oil Filter (Hydraulic) - Fan, Steering
525D, 535D, 545D and 555D Wheel Skidders C7.1 Engine Supplement Engine - Remove and Install
Updated Recommended Operating Tire Pressure Is Now Available for All K Series and M Series Wheel Loaders {0374, 4200, 4203, 7000} Updated Recommended Operating Tire Pressure Is Now Available for All K Series and M Series Wheel Loaders {0374, 4200, 4203, 7000}
Procedure to Rework the Pressure Relief Fitting On Rear Axle Center Housing, and Leg Housing On Certain 924H, 924K, 926K, 930H, 930K, and 930M Wheel Loaders {3260, 3268} Procedure to Rework the Pressure Relief Fitting On Rear Axle Center Housing, and Leg Housing On Certain 924H, 924K, 926K, 930H, 930K, and 930M Wheel Loaders {3260, 3268}
Fluid Film® Is Now Used in the Optional Transportation Protection on Certain Wheel Loaders {0355, 7000} Fluid Film® Is Now Used in the Optional Transportation Protection on Certain Wheel Loaders {0355, 7000}
D6R2 Track-Type Tractor Sound Information and Vibration Information
C27 and C32 Tier 4 Final Engines for MD6250 Drill and MD6310 Drill Fuel Injection Pump
Lift Cylinder Piston May Crack and Seize on Certain 993K and 993K2 Large Wheel Loaders {5102} Lift Cylinder Piston May Crack and Seize on Certain 993K and 993K2 Large Wheel Loaders {5102}
A Tool Box Rework Procedure Is Now Available For Certain D6K2 Track-Type Tractors {0600, 7259} A Tool Box Rework Procedure Is Now Available For Certain D6K2 Track-Type Tractors {0600, 7259}
Improved Window Washer Pump Assembly Is Now Used on Certain 950 GC Medium Wheel Loaders {7306} Improved Window Washer Pump Assembly Is Now Used on Certain 950 GC Medium Wheel Loaders {7306}
3500 and 3500B Engines Air Starting Motor - Inspect
992K Wheel Loader Systems Oil Filter (Power Train)
A New Autolube Pump and Internal Circuit Board Are Now Available for Certain 986H Wheel Loaders {7516, 7540} A New Autolube Pump and Internal Circuit Board Are Now Available for Certain 986H Wheel Loaders {7516, 7540}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.