An Improved Air Cleaner Assembly is Now Used {1051, 1054}
- Marine Engine:
- C12 MARINE (S/N: C1Z1-UP)
- Generator Set:
- C18 MARINE GS (S/N: CYN1-UP; MGS1-UP)
- C7 MARINE (S/N: C7D1-UP; M7A1-UP; M7G1-UP; C7X1-UP)
- C9 MARINE (S/N: X9X1-UP; CSN1-UP; Z9X1-UP)
- 3126B MARINE (S/N: 3GS1-UP)
- 3176C MARINE (S/N: 6BW1-UP)
- C-12 MARINE (S/N: 9HP1-UP)
- C18 MARINE (S/N: CKH1-UP; C1J1-UP; KJT1-UP; NAX1-UP; NAY1-UP)
- C18 MARINE ENG (S/N: J2K1-UP)
Description of Change: The new air cleaner assembly is manufactured with a revised process for the fittings for the air cleaner service indicator. The new process creates a more rugged joint between the two parts of the fitting. This prevents the joint from separating.
Adaptable To: The old air cleaners are now replaced in production with the new air cleaners. The new air cleaner groups are direct replacements for the previous air cleaner groups. Table 1 shows the old part numbers, the new part numbers, and the part numbers that are serviced.
Show/hide table
Old Part Number     | New Part Number     | Serviced Part Number     |
196-6849 Air Cleaner As     | 308-9313 Air Cleaner Gp     | 308-9314 Air Cleaner Gp     |
223-7452 Air Cleaner Gp     | 308-9314 Air Cleaner Gp     | 308-9314 Air Cleaner Gp     |
187-5179 Air Cleaner Gp     | 308-9315 Air Cleaner Gp     | 308-9316 Air Cleaner Gp     |
201-1269 Air Cleaner Gp     | 308-9316 Air Cleaner Gp     | 308-9316 Air Cleaner Gp     |
163-7342 Air Cleaner As     | 308-9315 Air Cleaner Gp     | 308-9316 Air Cleaner Gp     |
208-0570 Air Cleaner As     | 310-3947 Air Cleaner Gp     | 308-9316 Air Cleaner Gp     |
Table 2 shows the effectivity of the new air cleaner assemblies.
Show/hide table
Production of Air Cleaner Assemblies     | |
Marine Engines     | Serial Number     |
C-12     | (S/N: 9HP2822-UP)     |
C18     | (S/N: CKH2964-UP)     |
C12     | (S/N: C1Z1638-UP)     |
C18     | (S/N: C1J1045-UP)     |
C18     | (S/N: CYN620-UP)     |
C18     | (S/N: NAY68-UP)     |
C18     | (S/N: J2K115-UP)     |
C7     | (S/N: M7G103-UP)     |
C7     | (S/N: M7A102-UP)     |
C18     | (S/N: KJT100-UP)     |
C18     | (S/N: NAX24-UP)     |
C9     | (S/N: X9Y103-UP)     |
C9     | (S/N: Z9X468-UP)     |
C7     | (S/N: C7Z302-UP)     |
C18     | (S/N: MGS356-UP)     |
Caterpillar Information System:
2007/10/01 A New Base for the Engine Oil Cooler and Engine Oil Filter is Now Used {1306, 1378}
3176C and 3196 Engines for Caterpillar Built Machines Exhaust Manifold
3176C and 3196 Engines for Caterpillar Built Machines Exhaust Manifold
3608 Engine Idler Gears (Rear) - Install
3608 Engine Idler Gears (Rear) - Remove
3608 Engine Crankshaft Rear Seal - Install
C15 and C18 Petrolem Generator Set Engines Cat Data Link - Test
C15 and C18 Petrolem Generator Set Engines CAN Data Link - Test
C15 and C18 Petrolem Generator Set Engines Sensor Supply - Test
C11 and C13 Engines Engine Oil Filter Base
C-10 and C-12 Truck Engines Piston and Rings
G3520B Engine Control Panel - If Equipped
3608 Engine Camshaft - Remove
3608 Engine Valve Mechanism - Install
2007/10/22 The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
3608 Engine Rocker Arm - Disassemble
3608 Engine Vibration Damper - Remove
C-10 and C-12 Truck Engines Exhaust Manifold
C-10 and C-12 Truck Engines Exhaust Manifold
3608 Engine Crankcase Explosion Relief Valve - Remove and Install
3608 Engine Governor - Remove
3608 Engine Governor - Install
3500B and 3500C Marine Propulsion Engines Engine Will Not Crank
3176C and 3196 Engines for Caterpillar Built Machines Belt Tensioner