Engine Oil Filter Base
Show/hide table
图 1 | g01421171 |
机油滤清器底座的螺栓拧紧顺序 |
按照图 1 中所示拧紧顺序拧紧机油滤清器底座螺栓。
Show/hide table
图 2 | g01421173 |
(13) 机油冷却器旁通阀 (14) 机油滤清器旁通阀 (18) 发动机机油滤清器组件 |
(15) 242-3864 弹簧
- 在试验力下的长度 ... 43.18 mm (1.700
in)
- 试验力 ... 43.7 N (9.8 lb)
- 试验后的自由长度 ... 58.50 ± 0.50 mm (2.303 ± 0.020 in)
- 外径 ... 11 mm (0.4 in)
- 试验力 ... 43.7 N (9.8 lb)
Show/hide table
图 3 | g01421172 |
(A) 空心双头螺栓的螺纹上需要涂覆 154-9731 螺纹固定剂的长度 ... 10.0 ± 1.5 mm (0.39 ± 0.06 in)
(16) 空心双头螺栓的扭矩 ... 68 ± 7 N·m (50 ± 5 lb ft)
(17) 盖的扭矩 ... 70 ± 10 N·m (50 ± 7 lb ft)
Caterpillar Information System:
C-10 and C-12 Truck Engines Piston and Rings
G3520B Engine Control Panel - If Equipped
G3406 and G3412 Generator Set Engines Vibration Damper and Pulley
C13 Engine Crankshaft - Install
C13 Engine Crankshaft Main Bearings - Install
C27 and C32 Industrial and Petroleum Engines Turbocharger
C27 and C32 Industrial and Petroleum Engines Turbocharger
G3520B Engine Reference Material
3608 Engine Idler Gears (Front) - Install
3608 Engine Idler Gears (Front) - Remove
3608 Engine Crankshaft Front Seal - Install
C15 and C18 Petrolem Generator Set Engines Oil Temperature Is High
C15 and C18 Petrolem Generator Set Engines Sensor Supply - Test
C15 and C18 Petrolem Generator Set Engines CAN Data Link - Test
C15 and C18 Petrolem Generator Set Engines Cat Data Link - Test
3608 Engine Crankshaft Rear Seal - Install
3608 Engine Idler Gears (Rear) - Remove
3608 Engine Idler Gears (Rear) - Install
3176C and 3196 Engines for Caterpillar Built Machines Exhaust Manifold
3176C and 3196 Engines for Caterpillar Built Machines Exhaust Manifold
2007/10/01 A New Base for the Engine Oil Cooler and Engine Oil Filter is Now Used {1306, 1378}
2007/10/15 An Improved Air Cleaner Assembly is Now Used {1051, 1054}
3608 Engine Camshaft - Remove
3608 Engine Valve Mechanism - Install