14L Motor Grader Caterpillar

Assembly Procedure

Show/hide table

Illustration 1	g01344905

1. Install O-ring seal (22). Install plug (21). Tighten plug (21) to a torque 35 ± 4 N·m (26 ± 3 lb ft). Install O-ring seal (20). Install plug (19). Tighten plug (19) to a torque 17 ± 1.5 N·m (150 ± 13lb in).
   Show/hide table

   Illustration 2	g01344901

   Show/hide table

   Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment.

2. Install ball (15). Install spring (16). Install retainer (17). Install retaining ring (18).

3. Install slug (14). Install spool (13).
   Show/hide table

   Illustration 3	g01344900

4. Install spring (12). Install piston (11).
   Show/hide table

   Illustration 4	g01344896

5. Install O-ring seal (10).
   Show/hide table

   Illustration 5	g01344891

   Show/hide table

   Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment.

6. Install screw (8) and cover (7) onto body (9). Install bolts (6). Tighten bolts (6) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
   Show/hide table

   Illustration 6	g01344888

7. Install O-ring seal (5).
   Show/hide table

   Illustration 7	g01344871

8. Install cover (4). Install bolts (3). Tighten bolts (3) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
   Show/hide table

   Illustration 8	g01344856

9. Install O-ring seal (2). Install test port (1). Tighten test port (1) to a torque 17 ± 1.5 N·m (150 ± 13 lb in).

End By:

1. Install the relief valve.