G3520B Engine Caterpillar


Model View Illustrations

Usage:

G3520B GLF



Illustration 1g01417339

View of the right side of a typical G3520B Engine

(1) Turbocharger

(2) Exhaust outlet

(3) Electronic fuel control

(4) Fuel inlet

(5) Throttle

(6) Air inlet

(7) Air cleaner

(8) Lifting eye

(9) Jacket water outlet

(10) Oil filter

(11) Valve for oil sampling

(12) Alternator

(13) Inlet for the water jacket

(14) Water pump

(15) Engine oil pump

(16) Prelube pump

(17) Engine oil cooler

(18) Secondary engine control module (ECM)

(19) Relief valves for excess air in the crankcase

(20) Air starting motor

(21) Turbocharger oil accumulator

(22) Aftercooler




Illustration 2g01417337

View of the left side of a typical G3520B Engine

(23) Service indicator for the air filter

(24) Lifting eye

(25) Sensor for nitrogen oxide

(26) Buffer for the sensor for nitrogen oxide

(27) Crankcase breathers

(28) Cooler for the fuel

(29) Oil level gauge

(30) Fuel shutoff

(31) Gas pressure regulator

(32) Oil filler

(33) Outlet for the SCAC (separate circuit aftercooling)

(34) Temperature regulator for the aftercooler

(53) SCAC inlet

(36) SCAC pump

(37) Emergency stop button

(38) Primary ECM

(39) Temperature regulator

Caterpillar Information System:

G3408C and G3412C Engines Air/Fuel Ratio Control - NO<SUB>X</SUB> Feedback
14L Motor Grader Relief Valve (Main) - Assemble
14L Motor Grader Relief Valve (Main) - Disassemble
Installation Guide for the PL1000E Communications ECM{7610} Installation Guide for the PL1000E Communications ECM{7610}
G3500 Engines Vibration Damper
G3520B Engines Vibration Damper
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Customer Communication Module
G3520B Engine Belts - Inspect/Adjust/Replace
3500B Engines Radiator Core - Install
A New Turbocharger is Now Available{1000, 1052, 5510} A New Turbocharger is Now Available{1000, 1052, 5510}
C13, C15, and C18 Tier 4 Final Engines Cylinder Liner
C3.3 Industrial Engine Cylinder Head - Inspect
Reconditioning Dimensions for Idlers {4159} Reconditioning Dimensions for Idlers {4159}
TH31 Well Servicing Transmissions Transfer Gears - Disassemble
2007/09/24 Improved Software that Helps to Conserve Ether is Available {1901, 1902, 7620}
TH31 Well Servicing Transmissions Transfer Gears - Assemble
Installation Guide for the 256-7511 PL1000T Communication ECM{7606, 7610} Installation Guide for the 256-7511 PL1000T Communication ECM{7606, 7610}
2007/09/24 O-ring Aids in Engine Break-in {1251, 1290}
2007/09/01 O-ring Aids in Engine Break-in {1251, 1290}
2007/10/01 Matched Receiver Firmware for AccuGrade Dual GPS Systems {7010, 7620}
G3520B Engines Fuel Lines
2007/10/01 Improved Fuel Transfer Pump {1258, 1260}
G3520B Engines Fuel Lines
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B} Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.