An Improved Case And Frame Support Is Now Used On Certain D6 Track-Type Tractors {7051}
- Track-Type Tractor
- D6R Series III (S/N: GJB1-UP; WCB1-UP; HDC1-UP; RFC1-UP; TBC1-UP; HCD1-UP; HKE1-UP; WRG1-UP; MTJ1-UP; DMK1-UP; JEK1-UP; EXL1-UP; JDL1-UP; DLM1-UP; LFM1-UP; LGP1-UP; DPS1-UP; GMT1-UP; MRT1-UP; EXW1-UP)
- D6T (S/N: CR31-105; CG81-102; SGA1-99; JHB1-UP; KSB1-UP; ZEB1-UP; ZJB1-UP; JZC1-UP; SMC1-UP; DTD1-UP; JWD1-UP; LBD1-UP; RAD1-802; LAE1-UP; STE1-108; DJG1-UP; WCG1-UP; WFH1-UP; EJJ1-UP; LKJ1-UP; SLJ1-UP; GMK1-UP; RRK1-UP; SNK1-UP; KJL1-UP; MEL1-133; SKL1-UP; TSM1-UP; WLM1-UP; WRN1-503; KMR1-474; PLR1-UP; WES1-361; GCT1-UP; SGT1-204; JRW1-UP; RCW1-UP; RLW1-UP; LAY1-UP; TMY1-319; HTZ1-492; PEZ1-UP)
Description Of Change: An improved support is now used in the case and frame on certain D6 Track-Type Tractors. The material and heat treatment characteristics of 224-2674 Support have changed. These changes increase the service life of the equalizer bar center pin bore.
Adaptable To: The following change is adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Show/hide table
Illustration 1 | g06124178 |
(1) Equalizer bar center pin bore |
Show/hide table
Illustration 2 | g06124181 |
(2) |
Caterpillar Information System:
Aircraft Loading Fork Attachment (ALFA) Specifications
New Special Instructions to Hood Durability Improvements Certain 980K, 980M, and 982M Medium Wheel Loaders Is Now Available {0635, 0679, 7050, 7251, 7253, 7277} New Special Instructions to Hood Durability Improvements Certain 980K, 980M, and 982M Medium Wheel Loaders Is Now Available {0635, 0679, 7050, 7251, 7253, 7277}
992K Wheel Loader Systems Piston Pump (Hydraulic Fan)
980L Tier 3 Wheel Loader Machine System Brake Control Valve (Service) - Remove and Install
980L Tier 3 Wheel Loader Engine Supplement Alternator - Remove and Install
973K Track Type Loader Caterpillar Approved Work Tools
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Combination Valve (Brake Accumulator Charge, Fan Supply, Steering Pilot, Implement Pilot) - Disassemble
340F Excavator Machine Systems Pump Lines
854K Wheel Dozer Systems Relief Valve
993K Wheel Loader Belt - Inspect/Replace
Hood Durability Improvements on Certain 966K, 972K, 966M, and 972M Medium Wheel Loaders {0635, 0679, 7251} Hood Durability Improvements on Certain 966K, 972K, 966M, and 972M Medium Wheel Loaders {0635, 0679, 7251}
993K Wheel Loader Specifications
992K Wheel Loader Systems Pump Head
DEF Injector Troubleshooting on Certain C4.4 Engines {108I} DEF Injector Troubleshooting on Certain C4.4 Engines {108I}
C7.1 Engines and Generator Sets General Information
994K Wheel Loader Machine Systems Lift Position Control - Remove and Install
C7.1 Engines and Generator Sets Welding Precaution
C7.1 Engines and Generator Sets System Overview
C7.1 Engines and Generator Sets Component Location
980L Tier 3 Wheel Loader Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
High-Speed Transfer Drive Retaining Ring Failure on Certain Compact Wheel Loaders {3159, 4350, 4355} High-Speed Transfer Drive Retaining Ring Failure on Certain Compact Wheel Loaders {3159, 4350, 4355}
980L Medium Wheel Loaders Diagnostic Capabilities
980L Medium Wheel Loaders Diagnostic Trouble Codes
980L Medium Wheel Loaders Event Codes