Camshaft Bearing Position
Show/hide table
Illustration 1 | g03061837 |
Show/hide table
Specification for 456-6318 Cylinder Block Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
The camshaft bearings from the front surface of the cylinder block are the following dimensions: | |||
The oil holes must be aligned at the correct angle when the bearings are installed. Refer to Specifications, "Cylinder Block" for the correct angle. | |||
A | - | - | Distance from front face of cylinder block is |
B | - | - | Distance from front face of cylinder block is |
C | - | - | Distance from front face of cylinder block is |
D | - | - | Distance from front face of cylinder block is |
E | - | - | Distance from front face of cylinder block is |
F | - | - | Distance from front face of cylinder block is |
G | - | - | Distance from front face of cylinder block is |
H | - | - | Distance from front face of cylinder block is |
J | - | - | Distance from front face of cylinder block is |
Caterpillar Information System:
3516E Engines for Caterpillar Built Machines Fuel Injector
C175–16 Locomotive Engine Turbocharger
3516E Engines for Caterpillar Built Machines Vibration Damper Guard
950M T3 and 962M T3 Wheel Loader Engine Supplement Turbocharger - Remove - First Stage Turbocharger
3516E Engines for Caterpillar Built Machines Engine Support (Front)
950M T3 and 962M T3 Wheel Loader Engine Supplement Turbocharger - Install - First Stage Turbocharger
An Improved Link Assembly for Quick Coupler Is Now Used on Certain Wheel Loaders {6116, 6129} An Improved Link Assembly for Quick Coupler Is Now Used on Certain Wheel Loaders {6116, 6129}
988K XE Wheel Loader Braking System - Test
3516E Engines for Caterpillar Built Machines Engine Oil Scavenge Pump
3516E Engines for Caterpillar Built Machines Cylinder Block
950M T3 and 962M T3 Wheel Loader Engine Supplement Electronic Control Module - Remove and Install
950M T3 and 962M T3 Wheel Loader Engine Supplement Oil Pan - Remove - Aluminum Oil Pan
New Modification to the Injector Harness Bracket on Certain D10T Track-Type Tractors {1120, 1408} New Modification to the Injector Harness Bracket on Certain D10T Track-Type Tractors {1120, 1408}
C175–16 Locomotive Engine Test Tools for the Electrical System
950M T3 and 962M T3 Wheel Loader Engine Supplement ECM Mounting Bracket - Remove and Install
Installation Procedure for the Elite Product Link PL641 on Certain K-Series Medium Wheel Loaders {7606} Installation Procedure for the Elite Product Link PL641 on Certain K-Series Medium Wheel Loaders {7606}
G3516 TA Engine Engine Stalls Immediately After Starting
910M, 914M and 918M Wheel Loader Power Train Piston Pump (Hydrostatic) - Disassemble
910M, 914M and 918M Wheel Loader Power Train Piston Pump (Hydrostatic) - Assemble
910M, 914M and 918M Wheel Loader Power Train Piston Motor (Hydrostatic) - Disassemble
910M, 914M and 918M Wheel Loader Power Train Piston Motor (Hydrostatic) - Assemble
PG145 Transmission Control Manifold (Relief Valves)
D5R and D6N Track-Type Tractor Machine Systems Fuel Tank - Remove and Install
Coolant Diverters for the NRS Cooler Are Being Left Out after Servicing C9.3 Tier 4 Interim and Final Engines {1061, 1087, 108C, 135D, 1380} Coolant Diverters for the NRS Cooler Are Being Left Out after Servicing C9.3 Tier 4 Interim and Final Engines {1061, 1087, 108C, 135D, 1380}