Water Pump
Show/hide table
| |
| Illustration 1 | g06087780 |
Show/hide table
| Specification for 349-6213 Water Pump Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 1 | 229-5469 Bearing Locknut | Torque to Tighten set screw to Again retighten the set screw to |
| 2 | 1 | 258-8726 Pump Shaft | Lubricate the shaft with a thin film of clean engine oil before pressing the impeller onto the shaft. The end of the shaft must be flush with the face of the impeller within Diameter of the shaft for impeller seating is |
| 3 | 1 | 313-2760 Impeller | Bore of the impeller for new shaft is |
| 4 | 1 | 4N-1230 O-Ring Seal | Lubricate the O-ring seal with P80 lubricant or an approved equivalent. |
Caterpillar Information System:
950M T3 and 962M T3 Wheel Loader Engine Supplement Vibration Damper and Pulley - Install
950M T3 and 962M T3 Wheel Loader Machine System Counterweight - Remove and Install
950M T3 and 962M T3 Wheel Loader Engine Supplement Vibration Damper and Pulley - Remove
950M T3 and 962M T3 Wheel Loader Engine Supplement Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove and Install
3516E Engines for Caterpillar Built Machines Engine Oil Pump
3516E Engines Crankshaft - Install
3516E Engines Crankshaft - Remove
3516E Engines for Caterpillar Built Machines Gear Group (Front)
986K Wheel Loader Operator Controls
340F Excavator Operator Controls
Installation of the 6A Bulldozer and Slope Assist on a D6T Track-Type Tractor {6050, 6052, 6060, 6701} Installation of the 6A Bulldozer and Slope Assist on a D6T Track-Type Tractor {6050, 6052, 6060, 6701}
Installation of the Variable Pitch, Angle, and Tilt Blade and Slope Assist on a D6T Track-Type Tractor {6050, 6052, 6060, 6701} Installation of the Variable Pitch, Angle, and Tilt Blade and Slope Assist on a D6T Track-Type Tractor {6050, 6052, 6060, 6701}
C1.7 and C2.2 Industrial Engines Exhaust Cooler (NRS)
C1.7 and C2.2 Industrial Engines Engine Oil Lines
950M T3 and 962M T3 Wheel Loader Engine Supplement Oil Pan - Install - Aluminum Oil Pan
3516E Engines for Caterpillar Built Machines Flywheel Housing
950M T3 and 962M T3 Wheel Loader Engine Supplement Oil Pan - Remove - Aluminum Oil Pan
950M T3 and 962M T3 Wheel Loader Engine Supplement Electronic Control Module - Remove and Install
3516E Engines for Caterpillar Built Machines Cylinder Block
3516E Engines for Caterpillar Built Machines Engine Oil Scavenge Pump
988K XE Wheel Loader Braking System - Test
An Improved Link Assembly for Quick Coupler Is Now Used on Certain Wheel Loaders {6116, 6129} An Improved Link Assembly for Quick Coupler Is Now Used on Certain Wheel Loaders {6116, 6129}
950M T3 and 962M T3 Wheel Loader Engine Supplement Turbocharger - Install - First Stage Turbocharger
3516E Engines for Caterpillar Built Machines Engine Support (Front)