Counterweight - Remove and Install
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 439-3939 | 连杆支架组件 | 1 |
- 拆下尾灯组件 (1)。 断开线束组件 (2)，然后将尾灯组件 (1) 从配重上拆下。
Show/hide table
图 3 g06087771 - 将工具 (A) 和适当的起吊设备安装到配重 (3) 上。 配重 (3) 的重量约为
2385 kg (5258 lb) 。注: 配重的实际重量可能会由于特定机器配置而发生变化。
- 拆下螺栓 (4)，将下部配重 (3) 降至地面。
Show/hide table
| |
| 图 1 | g02727036 |
Show/hide table
| |
| 图 2 | g02727038 |
- 按与拆卸相反的顺序安装配重 (3)。
Caterpillar Information System:
950M T3 and 962M T3 Wheel Loader Engine Supplement Vibration Damper and Pulley - Remove
950M T3 and 962M T3 Wheel Loader Engine Supplement Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove and Install
3516E Engines for Caterpillar Built Machines Engine Oil Pump
3516E Engines Crankshaft - Install
3516E Engines Crankshaft - Remove
3516E Engines for Caterpillar Built Machines Gear Group (Front)
986K Wheel Loader Operator Controls
340F Excavator Operator Controls
Installation of the 6A Bulldozer and Slope Assist on a D6T Track-Type Tractor {6050, 6052, 6060, 6701} Installation of the 6A Bulldozer and Slope Assist on a D6T Track-Type Tractor {6050, 6052, 6060, 6701}
Installation of the Variable Pitch, Angle, and Tilt Blade and Slope Assist on a D6T Track-Type Tractor {6050, 6052, 6060, 6701} Installation of the Variable Pitch, Angle, and Tilt Blade and Slope Assist on a D6T Track-Type Tractor {6050, 6052, 6060, 6701}
3516E Engines for Caterpillar Built Machines Accessory Drive (Upper Right Hand)
Installation Of 6S And 6SU Bulldozer And Slope Assist On A D6T Track­Type Tractor {6050, 6051, 6060, 6078} Installation Of 6S And 6SU Bulldozer And Slope Assist On A D6T Track­Type Tractor {6050, 6051, 6060, 6078}
950M T3 and 962M T3 Wheel Loader Engine Supplement Vibration Damper and Pulley - Install
3512E Tier 4 Final Engines for Land Electric Drilling Water Pump
C1.7 and C2.2 Industrial Engines Exhaust Cooler (NRS)
C1.7 and C2.2 Industrial Engines Engine Oil Lines
950M T3 and 962M T3 Wheel Loader Engine Supplement Oil Pan - Install - Aluminum Oil Pan
3516E Engines for Caterpillar Built Machines Flywheel Housing
950M T3 and 962M T3 Wheel Loader Engine Supplement Oil Pan - Remove - Aluminum Oil Pan
950M T3 and 962M T3 Wheel Loader Engine Supplement Electronic Control Module - Remove and Install
3516E Engines for Caterpillar Built Machines Cylinder Block
3516E Engines for Caterpillar Built Machines Engine Oil Scavenge Pump
988K XE Wheel Loader Braking System - Test
An Improved Link Assembly for Quick Coupler Is Now Used on Certain Wheel Loaders {6116, 6129} An Improved Link Assembly for Quick Coupler Is Now Used on Certain Wheel Loaders {6116, 6129}