Angling Blade
Show/hide table
Illustration 1 | g06028421 |
Typical Example |
Show/hide table
Specification for 483-9320 Angle Blade and Edge Gp and 483-9250 Angling Blade | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
Coat all bores for pins with black 5P-0960 Grease Cartridge lubricant including left angle and tilt cylinder bearings. | |||
1 | 20 | 483-9315 Shim | Use as required when installing blade on C-Frame.
Thickness of one shim is |
2 | 2 | 484-0217 Pin As | Diameter is |
3 | 3 | 358-2194 Pin | Diameter is |
4 | 1 | 104-4817 Pin | Diameter is |
5 | 6 | 348-6260 Shim | Use as required when installing blade on C-Frame.
Thickness of one shim is |
6 | 12 | 484-0219 Shim | Use as required to ensure minimum vertical play between the fix and foldable blade.
Thickness of one shim is |
Caterpillar Information System:
Installing the 421-0263 High Flow Kit on Certain Skid Steer Loaders and Compact Track Loaders {5073} Installing the 421-0263 High Flow Kit on Certain Skid Steer Loaders and Compact Track Loaders {5073}
Installing the 486-3284 Air Conditioner Breather Kit {7320} Installing the 486-3284 Air Conditioner Breather Kit {7320}
Installation of the 504-1553 Mounting Kit on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1408, 1429, 7050} Installation of the 504-1553 Mounting Kit on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1408, 1429, 7050}
Replacing Ripper Adapters And Adapter Noses {6310, 6808, 6810} Replacing Ripper Adapters And Adapter Noses {6310, 6808, 6810}
Installation Procedure for the Conversion of the Fan Drive System on Certain Track-Type Loaders {1359} Installation Procedure for the Conversion of the Fan Drive System on Certain Track-Type Loaders {1359}
Fabricated Plates can Enhance the Operation of the Powered Access Ladder for Certain H-Series Wheel Tractor-Scrapers {0679, 7254} Fabricated Plates can Enhance the Operation of the Powered Access Ladder for Certain H-Series Wheel Tractor-Scrapers {0679, 7254}
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood Tilt Actuator - Remove and Install - Smart Actuator
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood - Remove and Install - One Piece Hood
Information on How to Make Field Improvements to the Radiator Guard/Grill is Available on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7155} Information on How to Make Field Improvements to the Radiator Guard/Grill is Available on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7155}
D6K2 and D6K Track-Type Tractor Systems Angle Cylinder (Bulldozer)
D6K2 and D6K Track-Type Tractor Systems Ether Starting Aid
D6K2 and D6K Track-Type Tractor Systems Flexible Exhaust Pipe
D6K2 and D6K Track-Type Tractor Systems Bank Valve (Three)
D6K2 and D6K Track-Type Tractor Systems Lift Cylinder (Bulldozer)
C1.7 and C2.2 Industrial Engine Relay - Test - Fuel Lift Pump Relay
An Improved Resistor is Used for the Heater and Air Conditioner on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7304, 7320} An Improved Resistor is Used for the Heater and Air Conditioner on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7304, 7320}
PL61 Pipelayer Systems General Information (HVAC System)
994K Large Wheel Loader Field Assembly Manual Steering Cylinder - Connect
924K, 926M, 930K, 930M, 938K, and 938M Wheel Loaders Machine System Pilot Pressure - Check
D6K2 and D6K Track-Type Tractor Systems Bank Valve (Four)
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Rotator Motor and Manifold - Disassemble
Compact Wheel Loaders MSS Error Codes "1746-13 + 1639-9" {7490, 7600, 7610, 7620} Compact Wheel Loaders MSS Error Codes "1746-13 + 1639-9" {7490, 7600, 7610, 7620}
PL61 Pipelayer Systems Location of Components (HVAC System)
D6K2 and D6K Track-Type Tractor Systems Piston Pump (Implement)