Hood Tilt Actuator - Remove and Install - Smart Actuator
- Open rear access door (1).
Show/hide table
Illustration 2 g06028195 - Remove bolts (2). Remove panel (3).
Show/hide table
Illustration 3 g06028200 - Remove pin (4).
Show/hide table
Illustration 4 g06028410 - Open side access panel (5).
Show/hide table
Illustration 5 g06028207 - Disconnect harness assembly (6).
Show/hide table
Illustration 6 g06028411 - Remove pin (7). Remove hood tilt actuator (8).
Show/hide table
Illustration 1 | g06028193 |
- Install hood tilt actuator (8) in the reverse order of removal.
- Cycle machine power OFF and ON.
- Wait two to three seconds after cycling machine power to use the hood toggle switch.
- Cycle the hood fully open and fully closed to test actuator for proper operation.
Caterpillar Information System:
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood - Remove and Install - One Piece Hood
Information on How to Make Field Improvements to the Radiator Guard/Grill is Available on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7155} Information on How to Make Field Improvements to the Radiator Guard/Grill is Available on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7155}
D6K2 and D6K Track-Type Tractor Systems Angle Cylinder (Bulldozer)
D6K2 and D6K Track-Type Tractor Systems Ether Starting Aid
D6K2 and D6K Track-Type Tractor Systems Flexible Exhaust Pipe
953K Track-Type Loader Power Train Piston Pump (Hydrostatic) - Remove and Install
D6K2 and D6K Track-Type Tractor Systems Angle Cylinder (Bulldozer)
New Hose Assemblies for the Tilt Cylinders Are Used on Certain 980M Medium Wheel Loaders {5057, 5104} New Hose Assemblies for the Tilt Cylinders Are Used on Certain 980M Medium Wheel Loaders {5057, 5104}
D6K2 and D6K Track-Type Tractor Systems Track Links
D6K2 and D6K Track-Type Tractor Systems Track Idler
D6K2 and D6K Track-Type Tractor Systems Angle Cylinder (Bulldozer)
D6K2 and D6K Track-Type Tractor Systems Tilt Cylinder (Bulldozer)
Fabricated Plates can Enhance the Operation of the Powered Access Ladder for Certain H-Series Wheel Tractor-Scrapers {0679, 7254} Fabricated Plates can Enhance the Operation of the Powered Access Ladder for Certain H-Series Wheel Tractor-Scrapers {0679, 7254}
Installation Procedure for the Conversion of the Fan Drive System on Certain Track-Type Loaders {1359} Installation Procedure for the Conversion of the Fan Drive System on Certain Track-Type Loaders {1359}
Replacing Ripper Adapters And Adapter Noses {6310, 6808, 6810} Replacing Ripper Adapters And Adapter Noses {6310, 6808, 6810}
Installation of the 504-1553 Mounting Kit on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1408, 1429, 7050} Installation of the 504-1553 Mounting Kit on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1408, 1429, 7050}
Installing the 486-3284 Air Conditioner Breather Kit {7320} Installing the 486-3284 Air Conditioner Breather Kit {7320}
Installing the 421-0263 High Flow Kit on Certain Skid Steer Loaders and Compact Track Loaders {5073} Installing the 421-0263 High Flow Kit on Certain Skid Steer Loaders and Compact Track Loaders {5073}
D6K2 and D6K Track-Type Tractor Systems Angling Blade
D6K2 and D6K Track-Type Tractor Systems Bank Valve (Three)
D6K2 and D6K Track-Type Tractor Systems Lift Cylinder (Bulldozer)
C1.7 and C2.2 Industrial Engine Relay - Test - Fuel Lift Pump Relay
An Improved Resistor is Used for the Heater and Air Conditioner on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7304, 7320} An Improved Resistor is Used for the Heater and Air Conditioner on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7304, 7320}
PL61 Pipelayer Systems General Information (HVAC System)