Fuel Transfer Pump - Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Make sure that the O-ring seal is installed on fuel transfer pump (1). Position fuel transfer pump (1) onto the engine. Make sure that the drive coupling is correctly engaged with the shaft of the engine oil pump.
- Install bolts (3) that secure fuel transfer pump (1) to the cover of the engine oil pump.
- Connect hose assemblies (2) and (4) that connect fuel transfer pump (1) and the fuel priming pump.
- Connect tube assembly (5).
- Turn ON the fuel supply to the engine.
Show/hide table
| |
| Illustration 1 | g01383590 |
Caterpillar Information System:
3512C Industrial Engine Fuel Transfer Pump - Remove
C15 and C18 Industrial Engines Inlet Air Is Restricted
C15 and C18 Industrial Engines Cat Data Link - Test
3512C Engine Sensor Signal (PWM) - Test
Procedure to Inspect Machines Potentially Damaged Due to Water Submersion{1000, 7000} Procedure to Inspect Machines Potentially Damaged Due to Water Submersion{1000, 7000}
3512C Engine Sensor Signal (Analog, Passive) - Test
C7 and C9 On-Highway Engines Clean Gas Induction - Test
C7 and C9 On-Highway Engines ARD Ignition - Test
C7 and C9 On-Highway Engines ARD Fuel Pressure - Test
C4.4 (MECH) Industrial Engine and Generator Sets Air Compressor - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets Electric Starting Motor - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets Alternator - Install - Engines With an Automatic Belt Tensioner
C15 and C18 Industrial Engines Engine Misfires, Runs Rough or Is Unstable
C15 and C18 Industrial Engines Engine Top Speed Is Not Obtained
C4.4 (MECH) Industrial Engine and Generator Sets Front Cover - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets Gear Group (Front) - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets Vacuum Pump - Remove and Install
3408C and 3412C Marine Engines Alternator and Regulator
C32 Marine and Auxiliary Marine Engines Auxiliary Water Pump
C7 and C9 Petroleum Engines Speed/Timing - Test
C7 and C9 Petroleum Engines Switch Circuits - Test
C7 and C9 On-Highway Engines Coolant Level Is Low
3512C Engine Sensor Supply - Test
C7 and C9 On-Highway Engines Coolant Temperature Is High