Fuel Priming Pump - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Turn the fuel supply to the OFF position.
Show/hide table
Illustration 1 g01383361 - Disconnect hose assemblies (2) and (3).
- Remove bolts (4).
- Remove fuel priming pump (1).
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position fuel priming pump (1).
- Install bolts (4).
- Connect hose assemblies (2) and (3).
- Turn the fuel supply to the ON position.
Show/hide table
| |
| Illustration 2 | g01383361 |
Caterpillar Information System:
C4.4 (MECH) Industrial Engine and Generator Sets Fan - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets V-Belts - Remove and Install - Engines Without an Automatic Belt Tensioner
C4.4 (MECH) Industrial Engine and Generator Sets Glow Plugs - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets Crankshaft Gear - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets Crankshaft - Install
C4.4 (MECH) Industrial Engine and Generator Sets Crankshaft - Remove
C4.4 (MECH) Industrial Engine and Generator Sets Crankshaft Main Bearings - Remove and Install - Crankshaft in Position
C4.4 (MECH) Industrial Engine and Generator Sets Connecting Rod Bearings - Install - Connecting rods in position
C4.4 (MECH) Industrial Engine and Generator Sets Connecting Rod Bearings - Remove - Connecting rods in position
C4.4 (MECH) Industrial Engine and Generator Sets Pistons and Connecting Rods - Assemble
C4.4 (MECH) Industrial Engine and Generator Sets Pistons and Connecting Rods - Disassemble
C4.4 (MECH) Industrial Engine and Generator Sets Pistons and Connecting Rods - Install
C4.4 (MECH) Industrial Engine and Generator Sets Fan Drive - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets Alternator - Remove - Engines Without an Automatic Belt Tensioner
C4.4 (MECH) Industrial Engine and Generator Sets Alternator - Install - Engines Without an Automatic Belt Tensioner
C4.4 (MECH) Industrial Engine and Generator Sets Alternator - Remove - Engines With an Automatic Belt Tensioner
C4.4 (MECH) Industrial Engine and Generator Sets Alternator - Install - Engines With an Automatic Belt Tensioner
C4.4 (MECH) Industrial Engine and Generator Sets Electric Starting Motor - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets Air Compressor - Remove and Install
C7 and C9 On-Highway Engines ARD Fuel Pressure - Test
C7 and C9 On-Highway Engines ARD Ignition - Test
C7 and C9 On-Highway Engines Clean Gas Induction - Test
3512C Engine Sensor Signal (Analog, Passive) - Test
Procedure to Inspect Machines Potentially Damaged Due to Water Submersion{1000, 7000} Procedure to Inspect Machines Potentially Damaged Due to Water Submersion{1000, 7000}