Fan Drive - Remove and Install
Start By:
- Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
- Remove bolts (1) from fan drive (2).
Note: Identify the orientation and the position of the fan drive.
- Remove fan drive (2).
Show/hide table
Illustration 1 | g01401779 |
Typical example |
- Check the fan drive for wear or damage. The fan drive is not a serviceable item. If the fan drive is worn or damaged, replace the fan drive.
- Install fan drive (2).
Note: Ensure the correct orientation of the fan drive.
- Install bolts (1). Tighten the bolts to a torque of
44 N·m (32 lb ft) .
Show/hide table
Illustration 2 | g01401779 |
Typical example |
End By:
- Install the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Caterpillar Information System:
3500C Marine Engines Exhaust Manifold
C3.3 Industrial Engine Fan - Remove and Install
C3.3 Industrial Engine V-Belts - Remove and Install
C3.3 Industrial Engine Glow Plugs - Remove and Install
C3.3 Industrial Engine Crankshaft Gear - Remove and Install
C3.3 Industrial Engine Crankshaft - Install
C3.3 Industrial Engine Crankshaft - Remove
C3.3 Industrial Engine Crankshaft Main Bearings - Remove and Install - Crankshaft in position
C3.3 Industrial Engine Connecting Rod Bearings - Install - Connecting rods in position
C3.3 Industrial Engine Connecting Rod Bearings - Remove - Connecting rods in position
C3.3 Industrial Engine Pistons and Connecting Rods - Install
C3.3 Industrial Engine Pistons and Connecting Rods - Assemble
C3.3 Industrial Engine Alternator - Remove
C3.3 Industrial Engine Alternator - Install
C3.3 Industrial Engine Electric Starting Motor - Remove and Install
3500C Marine Engines Exhaust Manifold
C32 Marine Propulsion Engines Sensor Signal (Analog, Active) - Test
G3408C and G3412C Engines Maintenance Interval Schedule - Standard
G3408C and G3412C Engines Maintenance Interval Schedule - Standby
C32 Marine Propulsion Engines Switch Circuits - Test
C18 Marine Generator Set Cooling System Coolant Sample (Level 1) - Obtain
C13 and C15 On-highway Engines Coolant Temperature Is Low
C7 On-highway Engine Exhaust Extension
G3520B Industrial Engines Air/Fuel Ratio Problem