Boom - 6.15 m (20.177 ft)
Show/hide table
| |
| Illustration 1 | g03745004 |
Show/hide table
| Specification for 393-8010 Boom | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 1 | 4I-4618 Pin As | Diameter is |
| 2 | 1 | 186-5637 Pin | Diameter is |
| 3 | 1 | 343-9249 Pin As | Diameter is |
| 4 | 2 | 166-1497 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
| 5 | 2 | 235-7527 Bushing | Install the bushing in the bore so that the part number of the bushing is facing outward.
Bore is Installation depth is |
| 6 | As required, use the following shims to adjust the following lateral clearance. The steel shim should be located at the boom side:
For Gosselies facility adjust the minimum lateral clearance to the maximum of For other facilities adjust the minimum lateral clearance to the maximum of |
||
| 1 | 113-2427 Shim | Thickness is |
|
| 1 | 093-0090 Shim | Thickness is |
|
Caterpillar Information System:
335F Excavator Machine System Specifications Handrail
335F Excavator Machine System Specifications Front Lines
C7.1 Engines Electrical Connectors
335F Excavator Machine System Specifications Boom Cylinder
C4.4 and C7.1 Engines Diagnostic Capabilities
335F Excavator Machine System Specifications Front Lines
D6R2 Track-Type Tractor Power Train Track Roller Frame - Remove and Install
335F Excavator Window Washer Reservoir - Fill
D6N Track-Type Tractor Plate Locations and Film Locations
725C2 Articulated Truck Mounting and Dismounting
D6R2 Track-Type Tractor Power Train Track Adjuster - Remove and Install
924K, 930K and 938K Wheel Loaders Receiver Dryer (Refrigerant) - Replace
335F CR Excavator C7.1 Engine Supplement Engine - Remove and Install
D6N Track-Type Tractor Specifications
335F Excavator Machine System Specifications Front Lines
D6R2 Track-Type Tractor Power Train Equalizer Bar - Remove and Install
C280 Marine Engines Exhaust System Contains Coolant
D6R2 Track-Type Tractor Power Train Equalizer Bar - Disassemble
D6R2 Track-Type Tractor Power Train Equalizer Bar - Assemble
C3.4B Industrial Engine Severe Service Application
PL72 Pipelayers Power Train Final Drive Planetary Carrier (In Chassis) - Remove and Install
D6N Track-Type Tractor Daily Inspection
D6R2 Track-Type Tractor Power Train Final Drive, Steering Planetary, and Brake (Right Side) - Remove and Install
D6R2 Track-Type Tractor Power Train Steering Differential and Brake - Disassemble