Piston Motor (Hydrostatic) - Assemble - Rear Hydrostatic Piston Motor
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-6340 | Threaded Rod | 1 |
B | 126-7176 | Forcing Screw | 1 |
3H-0465 | Push-Puller Plate | 4 | |
4C-5658 | Threaded Adapter | 1 | |
8B-7548 | Push-Puller Tool Gp | 1 | |
8B-7550 | Push Puller Leg | 2 |
- Connect piston assembly (43) to shaft assembly (38). Install bolts (42). Tighten bolts (42) to a torque of
9 ± 1 N·m (80 ± 9 lb in) .Show/hide tableIllustration 2 g02796573 - Install shim (36) and spring (35) into barrel (34).
Show/hide table
Illustration 3 g02804497 Show/hide tableImproper assembly of parts that are spring loaded can cause bodily injury.
To prevent possible injury, follow the established assembly procedure and wear protective equipment.
- Use Tooling (A) in order to help install barrel (34) onto piston assembly (43) and shaft assembly (38).
Show/hide table
Illustration 4 g02796607 - Install lip seal (41), washer (40), and retaining ring (39).
Show/hide table
Illustration 5 g02796751 - Install shaft assembly (38) into housing (37).
Show/hide table
Illustration 6 g02804558 - Use Tooling (B) in order to seat shaft assembly (38) into the housing.
Show/hide table
Illustration 7 g02804576 - Remove Tooling (A) and Tooling (B).
Show/hide table
Illustration 8 g02804658 - Install O-ring seal (33).
Show/hide table
Illustration 9 g02796553 - Install nut (32). Tighten nut (32) to a torque of
69 ± 15 N·m (51 ± 11 lb ft) . Ensure that Dimension (Y) is maintained.Show/hide tableIllustration 10 g02796549 - Install cap (31).
Show/hide table
Illustration 11 g02796543 - Install swashplate (30).
Show/hide table
Illustration 12 g02796538 - Install piston (29) and trunnion (28).
Show/hide table
Illustration 13 g02796531 - Install pump head (27) and bolts (26). Tighten bolts (26) to a torque of
310 ± 30 N·m (230 ± 22 lb ft) .Show/hide tableIllustration 14 g02796525 - Install spring (25) and O-ring seals (24).
Show/hide table
Illustration 15 g02796495 - Install spring (23).
Show/hide table
Illustration 16 g02796448 - Install nut (22). Tighten nut (22) to a torque of
10 ± 1 N·m (89 ± 9 lb in) . Ensure that Dimension (X) is maintained.Show/hide tableIllustration 17 g02796417 - Install cap (21).
Show/hide table
Illustration 18 g02796392 - Install retainer (20), bushing (19), dowel (18), spring (17), and O-ring seal (16).
Show/hide table
Illustration 19 g02796381 Show/hide tableImproper assembly of parts that are spring loaded can cause bodily injury.
To prevent possible injury, follow the established assembly procedure and wear protective equipment.
- Install valve (15) and bolts (14). Tighten bolts (14) to a torque of
37 ± 5 N·m (27 ± 4 lb ft) .Show/hide tableIllustration 20 g02797655 - Install valve (13).
Show/hide table
Illustration 21 g02796371 - Install plunger (12). Tighten plunger (12) to a torque of
10 ± 3 N·m (89 ± 27 lb in) .Show/hide tableIllustration 22 g02794585 - Install nut (11). Tighten nut (11) to a torque of
5 ± 1 N·m (44 ± 9 lb in) .Show/hide tableIllustration 23 g02794580 - Install Alan pin (10) (not shown). Tighten Alan pin (10) to a torque of
52 N·m (38 lb ft) Show/hide tableIllustration 24 g02794577 - Install piston (9).
Show/hide table
Illustration 25 g02794574 - Install bolt (8). Tighten bolt (8) to a torque of
120 ± 20 N·m (89 ± 15 lb ft) . Install O-ring seal (7).Show/hide tableIllustration 26 g02794571 - Install O-ring seal (6) onto valve (4).
Show/hide table
Illustration 27 g02803836 - Install valve (4). Tighten the bolts for valve (4) to a torque of
130 N·m (96 lb ft) . - Install the O-ring seal and plug (5). Tighten plug (5) to a torque of
100 N·m (74 lb ft) . - Install the O-ring seal and plug (3). Tighten plug (3) to a torque of
130 N·m (96 lb ft) . - Install the O-ring seal and plug (2). Tighten plug (2) to a torque of
112 N·m (83 lb ft) .Show/hide tableIllustration 28 g02794487 - Install the O-ring seal and plug (1). Tighten plug (1) to a torque of
35 N·m (26 lb ft) .
Show/hide table
Illustration 1 | g02796608 |
End By:
- Install the rear hydrostatic piston motor.
Caterpillar Information System:
926M, 930M and 938M Wheel Loaders Power Train Piston Motor (Hydrostatic) - Disassemble - Rear Hydrostatic Piston Motor
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Engine Air Filter Service Indicator - Inspect/Replace
2014/10/29 New Condenser Fan Is Now Used on Certain D7E Track-Type Tractors {1805, 5701, 7610, 7620}
926M, 930M and 938M Wheel Loaders Power Train Piston Motor (Hydrostatic) - Disassemble - Front Hydrostatic Piston Motor
D6R2 Track-Type Tractor Engine Supplement Alternator - Remove and Install
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Engine Air Filter Primary Element - Clean/Replace
930K Wheel Loader Power Train Piston Motor (Hydrostatic) - Remove and Install - Front Hydrostatic Piston Motor
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Cooling System Coolant Level - Check
2014/10/20 Cat Reman Pumps and Motors are Available for Certain Caterpillar Equipment {1356, 5070}
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Cooling System Coolant (ELC) - Change
D7E Track-Type Tractor Engine Supplement Hood Support - Remove and Install
930K Wheel Loader Power Train Piston Motor (Hydrostatic) - Remove and Install - Rear Hydrostatic Piston Motor
926M, 930M and 938M Wheel Loaders Power Train Piston Motor (Hydrostatic) - Assemble - Front Hydrostatic Piston Motor
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Hydraulic System Oil Level - Check
D6K2 and D6K Track-Type Tractor Systems Accumulator (Pilot) - Test and Charge
930K Wheel Loader Power Train Transmission - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Transmission - Assemble
926M, 930M and 938M Wheel Loaders Power Train Transmission - Disassemble
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Radiator Core - Clean
Installing the 443-0881 Precleaner Gp On Certain D7E Track-Type Tractors{1055} Installing the 443-0881 Precleaner Gp On Certain D7E Track-Type Tractors{1055}
C27 and C32 Engines for Caterpillar Built Machines Cooling Fan Control - Test
D6K2 and D6K Track-Type Tractor Systems Operational Checks
2014/12/09 Improved Power Train Compartment Oil Level Gauge Assembly Is Now Used on Certain D8R Track-Type Tractors {3016}
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Electronic Control (Winch System)