Fuel Injection Pump - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 267-2647     | Stop Plug     | 1     |
B     | 9S-4180     | Plug     | 1     |
4J-7533 | O-Ring Seal     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Ensure that the No. 1 cylinder is at the top center compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
- Position fuel pump (10) and install bolts (11) .
Show/hide table
Illustration 1 | g01365122 |
Note: Ensure that Tooling (A) is installed prior to installation of the fuel injection pump.
- Connect fitting (9) .
Show/hide table
Illustration 2 | g01365123 |
- Position bracket (7) and install nuts (8) .
Show/hide table
Illustration 3 | g01365125 |
Show/hide table
Illustration 4 | g01365126 |
- Position bracket (5) and install bolts (4) .
- Install bolts (6) .
- Connect tube assemblies (3) and (2) .
Show/hide table
Illustration 5 | g01365127 |
- Connect harness assemblies (1) .
- Remove Tooling (A) and install Tooling (B) .
Show/hide table
Illustration 6 | g01365124 |
End By: Install the air compressor. Refer to Disassembly and Assembly, "Air Compressor - Remove and Install".
Caterpillar Information System:
C9 On-highway Engine Fuel Injection Pump - Remove
2007/05/14 New Product Link Software Is Now Available {7606, 7620}
3412E, C30 and C32 Marine Engines Auxiliary Water Pump - Assemble
C7.1 (Mech) Industrial Engine Engine Rating Definitions
CX28 On-Highway Transmission Control Manifold - Assemble
CX28 On-Highway Transmission Control Manifold - Disassemble
C15 and C18 Industrial Engines Ether Starting Aid - Test
C7.1 (Mech) Industrial Engine Engine Rating Conditions
C9 Agricultural Engine for Challenger Tractors Electrical Power Supply - Test
CX28 On-Highway Transmission Control Manifold - Install
2007/04/30 New Bracket for the High Pressure Fuel Line {1252}
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1409 - FMI 06
C18 Marine Auxiliary Engines Fuel Temperature Is High
C7 and C9 On-highway Engines Emergency Vehicle Engine Features
C13 and C15 On-Highway Engines Emergency Vehicle Engine Features - C13 Fire Truck Engine
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1610 - FMI 03
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1610 - FMI 05
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1610 - FMI 06
C175-16 and C175-20 Generator Set Engines Coolant Level Is Low
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1484 - FMI 02
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1484 - FMI 07
C18 Marine Auxiliary Engines Coolant Level - Test
C18 Marine Generator Set Electronic Modular Control Panel 3 (EMCP 3)
C3.4 Engines for Caterpillar Built Machines Front Plate - Install