Fuel Filter Base
Show/hide table
Illustration 1 | g02557277 |
Show/hide table
Item     | Qty     | Part     | Specification description     |
1     | 2     | 8N-3653 Taperlock Stud     | Apply red Loctite 271 to the threads.     |
Torque to 68 ± 7 N·m (50 ± 5 lb ft). |
Caterpillar Information System:
C9 On-highway Engine Fuel Control Manifold (ARD) - Remove
C9 Agricultural Engine for Challenger Tractors Configuration Parameters
CX28 On-Highway Transmission Speed Sensor (Transmission) - Remove and Install
C4.4 Engines for Caterpillar Built Machines Crankcase Breather
C9 On-highway Engine Fuel Manifold (Rail) - Remove and Install
C4.4 (Mech) Industrial Engine Battery Electrolyte Level - Check
C4.4 (Mech) Industrial Engine After Starting Engine
C4.4 (Mech) Industrial Engine Cooling System Coolant (DEAC) - Change
3500 Engines Exhaust Bypass Valve - Remove and Install
C4.4 (Mech) Industrial Engine Cold Weather Starting
3512C Oil Well Service Engines Battery - Replace
C4.4 (Mech) Industrial Engine Starting the Engine
C4.4 (Mech) Industrial Engine Plate Locations and Film Locations
C4.4 Engines for Caterpillar Built Machines Crankshaft Pulley
C3.4 IND Industrial Engine Battery or Battery Cable - Disconnect
C4.4 Engines for Caterpillar Built Machines Belt Tension Chart
C4.4 Engines for Caterpillar Built Machines Alternator
C4.4 Engines for Caterpillar Built Machines Starter Motor
C9 Agricultural Engine for Challenger Tractors Diagnostic Trouble Code List
C9 On-highway Engine Fuel Control Manifold (ARD) - Install
C4.4 (Mech) Industrial Engine Emissions Certification Film
C3.4 IND Industrial Engine Engine Oil and Filter - Change
C9 On-highway Engine Fuel Transfer Pump - Remove
345D, 349D and 349D2 Excavator Machine System Specifications Relief Valve (Crossover)