Fuel Control Manifold (ARD) - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove nuts (1) and position bracket assembly (2) out of the way.
Show/hide table
Illustration 1 | g01360842 |
- Remove clamp assembly (3) .
- Disconnect all harness assemblies (4) .
- Remove all tube assemblies (7) .
- Remove bolts (6) and remove fuel manifold (5) .
Caterpillar Information System:
C9 Agricultural Engine for Challenger Tractors Configuration Parameters
CX28 On-Highway Transmission Speed Sensor (Transmission) - Remove and Install
C4.4 Engines for Caterpillar Built Machines Crankcase Breather
C9 On-highway Engine Fuel Manifold (Rail) - Remove and Install
C4.4 (Mech) Industrial Engine Battery Electrolyte Level - Check
C4.4 (Mech) Industrial Engine After Starting Engine
C4.4 (Mech) Industrial Engine Cooling System Coolant (DEAC) - Change
3500 Engines Exhaust Bypass Valve - Remove and Install
C4.4 (Mech) Industrial Engine Cold Weather Starting
3512C Oil Well Service Engines Battery - Replace
C4.4 (Mech) Industrial Engine Starting the Engine
C4.4 (Mech) Industrial Engine Stopping the Engine
C32 Marine and Auxiliary Marine Engines Fuel Filter Base
C4.4 (Mech) Industrial Engine Plate Locations and Film Locations
C4.4 Engines for Caterpillar Built Machines Crankshaft Pulley
C3.4 IND Industrial Engine Battery or Battery Cable - Disconnect
C4.4 Engines for Caterpillar Built Machines Belt Tension Chart
C4.4 Engines for Caterpillar Built Machines Alternator
C4.4 Engines for Caterpillar Built Machines Starter Motor
C9 Agricultural Engine for Challenger Tractors Diagnostic Trouble Code List
C9 On-highway Engine Fuel Control Manifold (ARD) - Install
C4.4 (Mech) Industrial Engine Emissions Certification Film
C3.4 IND Industrial Engine Engine Oil and Filter - Change
C9 On-highway Engine Fuel Transfer Pump - Remove