Ensure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap to clean the safety messages. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. The safety messages that are loosened could drop off of the engine.
Replace any safety message that is damaged or missing. If a safety message is attached to a part of the engine that is replaced, install a new safety message on the replacement part. Your Caterpillar dealer can provide new safety messages.
 | |
| Illustration 1 | g01953872 |
 | |
| Illustration 2 | g01953888 |
Universal Warning (1)
This safety message is located on the rear of the control panel and on the terminal box of the generator.
 |
| g01370904 |
 |
Do not operate or work on this engine or generator set unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the warnings and instructions could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility. |
 |
Hot Surface (2)
This safety message for hot surfaces is located on the sides of the radiator and on the barrel of the generator.
 |
| g01384734 |
|
Hot surface! Do not touch! |
|
Automatic Starting (3)
This safety message for automatic starting is located on the sides of the terminal box and on the rear of the control panel.
 |
| g01392484 |
|
When the engine is in the AUTOMATIC mode, the engine can start at any moment. To avoid personal injury, always remain clear of the the engine when the engine is in the AUTOMATIC mode. |
|
Electrical Shock (4)
This safety message is located on the rear of the control panel.
 |
| g01368035 |
|
WARNING! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death. |
|
Electrocution (5)
This safety message is located on the sides of the terminal box and on the rear of the control panel.
 |
| g01392482 |
 |
DANGER: Shock/Electrocution Hazard-Do not operate this equipment or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings will result in serious injury or death. |
Hot Surface (6)
This safety message is located on each side of the engine.
 |
| g01372256 |
|
Hot surface! Do not touch! |
|
Generator Set Lifting (7)
This safety message is located on each side of the terminal box.
 |
| g01433231 |
|
Fall Hazard. Severe injury or death could occur from falling while servicing components on the machine at elevated positions. Use proper precautions and / or external access devices. |
|