Oscillating Axle (Rear)
Show/hide table
Illustration 1 | g06261141 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
1 | 1 | 149-8220 Pressure Relief Fitting | Torque to |
2 | 48 | 8T-0666 Bolt | Torque to |
3 | 3 | 164-4180 Plug As | Torque to |
4 | 2 | 9S-4190 O-Ring Plug | Torque to |
5 | 2 | 1K-6853 Pressure Relief Fitting | Torque to |
6 | 1 | 9S-4185 O-Ring Plug | Torque to |
Show/hide table
Illustration 2 | g06261148 |
View B-B |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
7 | 36 | 160-8510 Self-Locking Bolt | Use the following procedure to tighten the bolt:
1. Torque to 2. Turn an additional angle of 120 ± 10 degrees. |
8 | - | - | Before assembly, apply 8C-8422 Sealant to the mating surfaces. |
9 | 1 | 105-8754 Bushing | Outside diameter is |
10 | 1 | 5P-7684 Plug | Torque to |
11 | 1 | 165-4929 Magnetic Plug As | Torque to |
12 | 1 | 105-8739 Bushing | Outside diameter is |
Caterpillar Information System:
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Main Control Valve
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Cleaner - Mounting
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Bulldozer Lift Cylinder
Procedure for Routing Air Conditioner Hoses for the Heater and Air Conditioner Group on Certain D8T, D9T, D10T, and D11T Track-Type Tractors{7304, 7309, 7320} Procedure for Routing Air Conditioner Hoses for the Heater and Air Conditioner Group on Certain D8T, D9T, D10T, and D11T Track-Type Tractors{7304, 7309, 7320}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Fixed Axle (Front)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Transmission Hydraulic Control
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Cutting Edge
349F and 352F Excavators Adjustable Gauge Undercarriage Frame
980M and 982M Medium Wheel Loaders ECM Location Code - Test
D7E Track-Type Tractor Systems Hydraulic Oil Cooling System
980M and 982M Medium Wheel Loaders Condition Switch (Two Wire) - Test
980M and 982M Medium Wheel Loaders Cat Data Link - Test
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Cleaner
2014/03/06 New Hose Is Now Used in the Torque Converter Cooler Lines Group on 980H Wheel Loaders {1375, 3016, 5057}
Custom Product Support Literature for the 303-4178 Steel Mill Ar for the 972H Wheel Loaders{0374, 7000} Custom Product Support Literature for the 303-4178 Steel Mill Ar for the 972H Wheel Loaders{0374, 7000}
990K Wheel Loader Sensor Supply - Test
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Cab - Door Right Hand
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Cab - Roof
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Diesel Exhaust Fluid Module - Remove and Install - Tractor
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Lines (Diagnostic)
Installation of the 6A Bulldozer on a D6T Track-Type Tractor{6050, 6052, 6060, 6701} Installation of the 6A Bulldozer on a D6T Track-Type Tractor{6050, 6052, 6060, 6701}
953K and 963K Track-Type Loaders Declaration of Conformity
953K and 963K Track-Type Loaders Plate Locations and Film Locations
D7E Track-Type Tractor Systems Accumulator (Track Tension) - Test and Charge