Bulldozer Lift Cylinder
Show/hide table
| |
| Illustration 1 | g03644141 |
Show/hide table
| Specification for 397-9390 Hydraulic Cylinder Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 5J-1192 Bushing | Bore before assembly is |
| 2 | 1 | 2J-0564 Locknut | Before assembly, lubricate the threads and face with 8T-9579 Oil.
Torque to |
| A | 1 | 419-9163 Hydraulic Cylinder | Bore is |
| B | 1 | 419-9171 Rod As | Diameter is |
| 3 | 1 | 266-9985 Head | Before assembly, lubricate the threads with clean grease.
Bore (C) over four lands is Torque to |
| 4 | 28 | 3G-0911 Shim | As required, use the following shim:
Thickness of one shim is |
| 5 | 1 | 186-5147 Wear Ring | Bore before assembly is Thickness is |
| 6 | 1 | 167-2184 Buffer Seal As | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 7 | 1 | 167-2318 U-Cup Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 8 | 1 | 233-0621 Wiper Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 9 | - | - | Before assembly, apply green Loctite 609 to the wiper seal groove. |
Caterpillar Information System:
Procedure for Routing Air Conditioner Hoses for the Heater and Air Conditioner Group on Certain D8T, D9T, D10T, and D11T Track-Type Tractors{7304, 7309, 7320} Procedure for Routing Air Conditioner Hoses for the Heater and Air Conditioner Group on Certain D8T, D9T, D10T, and D11T Track-Type Tractors{7304, 7309, 7320}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Fixed Axle (Front)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Transmission Hydraulic Control
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Cutting Edge
349F and 352F Excavators Adjustable Gauge Undercarriage Frame
980M and 982M Medium Wheel Loaders ECM Location Code - Test
D7E Track-Type Tractor Systems Hydraulic Oil Cooling System
980M and 982M Medium Wheel Loaders Condition Switch (Two Wire) - Test
980M and 982M Medium Wheel Loaders Cat Data Link - Test
980M and 982M Medium Wheel Loaders CAN Data Link - Test
980M and 982M Medium Wheel Loaders Alarm - Test
980M and 982M Medium Wheel Loaders Actuator - Test
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Cleaner - Mounting
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Main Control Valve
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Oscillating Axle (Rear)
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Cleaner
2014/03/06 New Hose Is Now Used in the Torque Converter Cooler Lines Group on 980H Wheel Loaders {1375, 3016, 5057}
Custom Product Support Literature for the 303-4178 Steel Mill Ar for the 972H Wheel Loaders{0374, 7000} Custom Product Support Literature for the 303-4178 Steel Mill Ar for the 972H Wheel Loaders{0374, 7000}
990K Wheel Loader Sensor Supply - Test
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Cab - Door Right Hand
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Cab - Roof
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Diesel Exhaust Fluid Module - Remove and Install - Tractor
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Lines (Diagnostic)
Installation of the 6A Bulldozer on a D6T Track-Type Tractor{6050, 6052, 6060, 6701} Installation of the 6A Bulldozer on a D6T Track-Type Tractor{6050, 6052, 6060, 6701}