910K and 914K Compact Wheel Loader Machine Systems Caterpillar


Lines (Pilot)

Usage:

910K AY4


Illustration 1g03578066

Table 1
Specification for 392-2988 Pilot Lines Gp 
Item  Qty  Part  Specification Description 
148-8378 Elbow As  Torque to 35 ± 3 N·m (26 ± 2 lb ft)
7X-2533 Bolt  Torque to 6 ± 1 N·m (53 ± 9 lb in)
7X-2534 Bolt  Torque to 20 ± 2 N·m (177 ± 18 lb in)


Illustration 2g03578062
Left side view of the machine

Table 2
Item  Qty  Part  Specification Description 
8T-4178 Bolt  Torque to 30 to 35 N·m (22 to 26 lb ft)


Illustration 3g03578158
437-2847 Control Manifold Gp

Table 3
Item  Qty  Part  Specification Description 
095-0641 Bolt  Torque to 4.0 ± 0.5 N·m (35.4 ± 4.4 lb in)
Tighten the nut to 44 ± 3 N·m (32 ± 2 lb ft)
Tighten the nut to 16.5 ± 1.5 N·m (146.0 ± 13.3 lb in)

Caterpillar Information System:

D6K2 and D6K Track-Type Tractor Systems Power Angling Frame - Cylinder Pin
910K and 914K Compact Wheel Loader Machine Systems Creeper Control
Rework Procedure for the C-Frame Pivot Pin on Certain D6G Track-Type Tractors{6063} Rework Procedure for the C-Frame Pivot Pin on Certain D6G Track-Type Tractors{6063}
910K and 914K Compact Wheel Loader Machine Systems Lines (Lift Cylinder)
D6N Track-Type Tractor Operator Controls
D6N Track-Type Tractor Daily Inspection
D6R Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6R Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
980H Wheel Loader Power Train Oscillating Axle (Rear) - Remove
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Location of Components (HVAC System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems General Information (HVAC System)
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Down Does Not Respond To Progressive Joystick Motion
D6N Track-Type Tractor Mounting and Dismounting
910K and 914K Compact Wheel Loader Machine Systems Air Conditioner Lines
2014/02/12 Improved Front Harness Is Now Used on 966K and 972K Wheel Loaders {1408}
D6K2 Track-Type Tractor Systems Pilot Lines
950M, 962M, 950M Z and 962M Z Wheel Loaders Seat - Remove and Install
374F and 390F Excavators Tool Control System Combined Function - Electric Control
374F and 390F Excavators Tool Control System One-Way/Two Pump - Electric Control
374F and 390F Excavators Tool Control System Medium Pressure Hydraulic System
D8T, D9T and D10T2 Track-Type Tractors VIMSTM 3G / Product LinkTM Determining Diagnostic Trouble Codes
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Stick In (Single Function) Speed Is Slow
2014/01/23 Improved Super Extreme Service (SES) Track Shoes are Now Available for Certain D10 Track-Type Tractors {4170, 4172}
D8T, D9T and D10T2 Track-Type Tractors VIMSTM 3G / Product LinkTM ECM - Configure
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Stick In Does Not Function
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.