C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Gear Group (Rear)

Usage:

826K 2L3


图 1g03514296
后视图

表 1
350-6700 后齿轮总成的技术规格 
项目  数量  零件  技术规格说明 
229-1476 接头组件  用发动机机油润滑齿轮轴颈、轴承孔和止推端面。
209-8624 衬套 的外径为 77.185 ± 0.020 mm (3.0388 ± 0.0008 in)
衬套的厚度为 2.480 ± 0.015 mm (0.0976 ± 0.0006 in)
安装深度为 4.0 ± 0.5 mm (0.16 ± 0.02 in)。 
6V-5141 O 形密封圈  用油液稍微润滑即将密封的孔。 
230-4069 齿轮组件  将齿轮组件装配到发动机中,同时使带机油通道塞的端部位于液压泵接头中,如图 1 中所示。
用发动机机油润滑齿轮轴颈、轴承孔和止推端面。 
229-1472 齿轮组件  将齿轮组件装配到发动机中,同时使带机油通道塞的端部位于液压泵接头中,如图 1 中所示。
用发动机机油润滑齿轮轴颈、轴承孔和止推端面。 
209-9770 挡圈组件  用发动机机油润滑齿轮轴颈、轴承孔和止推端面。 
207-8211 惰轮组件  用发动机机油润滑齿轮轴颈、轴承孔和止推端面。
安装后, 209-8621 轴承的孔径为 88.090 ± 0.013 mm (3.46810 ± 0.0005 in)。 

Caterpillar Information System:

950 GC Wheel Loader Machine Systems Front Wiring
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
992K Wheel Loader Systems Position Sensor (Lift Linkage, Tilt Linkage)
C15 and C18 Engines for Caterpillar Built Machines Valve Rocker Arm
24 Motor Grader Engine Crankcase Breather - Clean
D10T2 Track-Type Tractor Engine Air Precleaner - Clean
D8T Track-Type Tractor General Information (Steering System)
D8T Track-Type Tractor Systems Location of Components (Steering System)
D7E Track-Type Tractor Track Adjuster and Recoil System - Check/Adjust
D10T2 Track-Type Tractor Electronic Unit Injector - Inspect/Adjust
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Power Train Oil Filter Bypass Valve - Remove and Install
D10T2 Track-Type Tractor Cooling System Coolant Sample (Level 2) - Obtain
D6N LGP OEM Track-Type Tractor Power Train System Torque Converter Mounting
950 GC Wheel Loader Machine Systems Window Wiper and Wiper Motor
950 GC Wheel Loader Machine Systems Window Washer
950 GC Wheel Loader Safety Messages
950 GC Wheel Loader Additional Messages
950 GC Wheel Loader Machine Systems Air Conditioner
627K Wheel Tractor-Scraper Safety Messages
2013/11/21 Hitch Bearing Grease Hose Routing Improvement Is Now Used on Certain Compact Wheel Loaders {7510, 7540}
950 GC Wheel Loader Machine Systems Air Conditioner Lines
980H Wheel Loader Machine Systems Gear Pump (Pilot, Brake) - Remove and Install
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Location of Components (Power Train System)
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Solenoid Valve - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.