Hitch Bearing Grease Hose Routing Improvement Is Now Used on Certain Compact Wheel Loaders {7510, 7540}
- Compact Wheel Loader:
- 906H (S/N: SDH1-UP)
- 906H2 (S/N: JRF1-UP)
- 907H (S/N: SJM1-UP)
- 907H2 (S/N: JRS1-UP)
- 908H (S/N: LMD1-UP)
- 908H2 (S/N: JRD1-UP)
Description of Change: An improved routing of the hitch bearing grease hose is now used on certain Compact Wheel Loaders. The improved hose routing increases the service life of the grease hose.
Adaptable To:
Show/hide table
Required Parts     | |||
Number     | Qty     | Part Number     | Description     |
1     | 1     | 3H-0120     | Elbow     |
2     | 1     | 132-5789     | Clip     |
3     | 3     | 7K-1181     | Cable Strap     |
4     | 38 cm (15 inch)     |
160-2242     | Abrasion Sleeve     |
Show/hide table
Illustration 1 | g03526722 |
Former grease hose routing |
Show/hide table
Illustration 2 | g03526379 |
Improved grease hose routing |
- Route the grease hose through the steering cylinder mounting.
- Add protective sleeve (4) and secure with cable straps (3) .
- Install clip (2) using the existing bolt on the frame.
- Secure the grease hose to clip (2) with cable strap (3) .
- 906H (S/N: SDH1-UP)
- 906H2 (S/N: JRF1-1293)
- 907H (S/N: SJM1-UP)
- 907H2 (S/N: JRS1-499)
- 908H (S/N: LMD1-UP)
- 908H2 (S/N: JRD1-1147)
- 906H2 (S/N: JRF1294-UP)
- 907H2 (S/N: JRS500-UP)
- 908H2 (S/N: JRD1148-UP)
Caterpillar Information System:
627K Wheel Tractor-Scraper Safety Messages
950 GC Wheel Loader Machine Systems Air Conditioner
950 GC Wheel Loader Additional Messages
950 GC Wheel Loader Safety Messages
950 GC Wheel Loader Machine Systems Window Washer
950 GC Wheel Loader Machine Systems Window Wiper and Wiper Motor
D6N LGP OEM Track-Type Tractor Power Train System Torque Converter Mounting
C15 and C18 Engines for Caterpillar Built Machines Gear Group (Rear)
950 GC Wheel Loader Machine Systems Front Wiring
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
992K Wheel Loader Systems Position Sensor (Lift Linkage, Tilt Linkage)
C15 and C18 Engines for Caterpillar Built Machines Valve Rocker Arm
950 GC Wheel Loader Machine Systems Air Conditioner Lines
980H Wheel Loader Machine Systems Gear Pump (Pilot, Brake) - Remove and Install
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Location of Components (Power Train System)
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Solenoid Valve - Test
910K and 914K Compact Wheel Loaders Parking Brake
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Transmission Oil Cooler - Remove and Install
D6N LGP OEM Track-Type Tractor Hydraulic System Location of Hydraulic Components
980H Wheel Loader Power Train Fender (Front) - Remove and Install
950 GC Wheel Loader Steering System Machine Preparation for Troubleshooting
Troubleshooting for Low Brake Accumulator Pressure on Series K-Series Medium Wheel Loaders {4262, 4263, 4264, 4267, 4293, 5051, 7610, 7620} Troubleshooting for Low Brake Accumulator Pressure on Series K-Series Medium Wheel Loaders {4262, 4263, 4264, 4267, 4293, 5051, 7610, 7620}
950 GC Wheel Loader Braking and Hydraulic Fan System System Pressure - Release
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Diagnostic Trouble Codes