Power Train Oil Filter Bypass Valve - Remove and Install
- Remove cover (1).
Show/hide table
Illustration 2 g03513637 - Disconnect harness assembly (2). Remove power train oil filter bypass valve (3).
Show/hide table
Illustration 1 | g03513577 |
- Install power train oil filter bypass valve (3) in the reverse order of removal.
Caterpillar Information System:
D10T2 Track-Type Tractor Cooling System Coolant Sample (Level 2) - Obtain
D10T2 Track-Type Tractor Cooling System Coolant Level - Check
D8T Track-Type Tractor Systems Piston Pump (Fan Drive)
2014/01/07 An Improvement to the Right Engine Enclosure Door Latch Is Now Used {1150, 7251, 7251}
D10T2 Track-Type Tractor Cooling System Coolant (ELC) - Change
2013/11/12 An Improved Fuel Filler Neck Tube As Is Now Used on Certain Compact Wheel Loaders {1273, 1273}
D6N LGP OEM Track-Type Tractor Hydraulic System General Information (Hydraulic System)
910K and 914K Compact Wheel Loaders Hydraulic Fan Speed - Test and Adjust
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Solenoid Valve (Switch Controlled) - Test
C4.4 Engines for Caterpillar Built Machines Turbocharger
D10T2 Track-Type Tractor Machine Systems Ripper Lift Cylinder - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fuel Injection Pump
D10T2 Track-Type Tractor Electronic Unit Injector - Inspect/Adjust
D7E Track-Type Tractor Track Adjuster and Recoil System - Check/Adjust
D8T Track-Type Tractor Systems Location of Components (Steering System)
D8T Track-Type Tractor General Information (Steering System)
D10T2 Track-Type Tractor Engine Air Precleaner - Clean
24 Motor Grader Engine Crankcase Breather - Clean
C15 and C18 Engines for Caterpillar Built Machines Valve Rocker Arm
992K Wheel Loader Systems Position Sensor (Lift Linkage, Tilt Linkage)
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
950 GC Wheel Loader Machine Systems Front Wiring
C15 and C18 Engines for Caterpillar Built Machines Gear Group (Rear)
D6N LGP OEM Track-Type Tractor Power Train System Torque Converter Mounting