G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Caterpillar


Throttle Control Valve - Remove

Usage:

G3520B GLF

Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01346385

  1. Disconnect harness assembly (3).

  2. Remove bolts (1), the washers, the spacers, and the nuts.

  3. Remove bolts (4), the washers, and the nuts.

  4. Remove bolt (5) and the washers.

  5. Relocate elbow (2).

  6. Remove throttle control valve (6).

  7. Remove the O-ring seals from both sides of the throttle control valve.

Caterpillar Information System:

3606 and 3608 Engines Valve Lash and Valve Bridge Adjustment
3606 and 3608 Engines Compression
3606 and 3608 Engines Crankcase Pressure
3606 and 3608 Engines Measuring Exhaust Temperature
3606 and 3608 Engines Measuring Inlet Manifold Pressure
3606 and 3608 Engines Fuel Setting
3606 and 3608 Engines Woodward PGEV Governor
C4.4 (Mech) Industrial Engine Rocker Shaft
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Diagnostic Capabilities
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202} Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
3606 and 3608 Engines Woodward 3161 Governor
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Module - Flash Program
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Service Tools
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 739 - FMI 3
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 739 - FMI 5
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 739 - FMI 6
2007/02/05 New PL1000E Software is now Available {7606, 7620}
2007/02/05 New PL1000E Software is now Available {7606, 7620}
2007/06/11 An Improved Alternator Guard is Used {7174}
3500B Marine Propulsion Engines Product Storage
C18 Petroleum Generator Sets Engine Air Cleaner Element (Dual Element) - Clean/Replace
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Throttle Control Valve - Install
2007/02/12 Procedure to Torque Camshaft Gear {1206, 1210}
2007/02/01 Procedure to Torque Camshaft Gears which Include Camshaft Gears in Remanufactured Engines with Serial Number Prefix <B>S/N:</B>4AS {1206, 1210}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.